Dell 5100MP owner manual Network Settings Menu

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

PIP IMAGE —Select On to enter Options to select following settings. Select Off to disable the picture-in-picture display function.

PIP SOURCE —Use PIP Source to step through the display source one by one for the foreground display. The possible PIP source is available in the OSD selection depending on the current primary input source. The possible combination of the sources refer to page 56.

PIP SIZE —Adjust the image size of the foreground display.

PIP X POSITION —Horizontally adjust the image position of the PIP display. PIP Y POSITION —Vertically adjust the image position of the PIP display.

PBP IMAGE —Select On to enable the picture-by-picture display. Select Off to disable the picture-by-picture function.

Network Settings Menu

DHCP —Select On to assign an IP address to the projector from a DHCP server automatically. Select Off to assign an IP address manually.

IP ADDRESS—Press Enter to set up an IP address. Press left or right button to select the number position, up or down button to change the number.

SUBNET MASK—Press Enter to set up an subnet mask number. Press left or right button to select the number position, up or down button to change the number.

GATEWAY—Select to set the default gateway of the network connected to the projector. Press left or right button to select the number

position, up or down button to change the number.

DNS—Type in the IP address of DNS server on the network connected to the projector. 12 numeric characters are used.

APPLY CHANGE—Press to confirm the settings.

RESET NETWORK SETTING—Press to the default setting.

34

Using Your Projector