Dell 5100MP owner manual Using Your Projector

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

4	Source					Press to toggle through S-video, Composite
						Video, M1-D, D-sub, BNC, Component, HDMI
						and M1 sources when multiple sources are
						connected to the projector.
5	Keystone adjustment					Press to adjust image distortion caused by tilting
						the projector. (±20 degrees)
6	Enter					Press to confirm the selection item.
7	Auto adjust					Press to synchronize the projector to the input
						source.
						Auto adjust does not operate if the on-screen
						display (OSD) is displayed.
8	LCD status display					LCD display is for real time projector status.
9	TEMP warning light					• If the TEMP light is solid orange, the projector
							has overheated. The display automatically shuts
							down. Turn the display on again after the
							projector cools down. If the problem persists,
							contact Dell.
						• If the TEMP light is blinking orange, a projector
							fan has failed and the projector automatically
							shuts down. If the problem persists, contact
							Dell.
10	LAMP warning light					If the LAMP light is solid orange, replace the
						lamp.
11		and		buttons		Press to adjust the OSD setting.
12	Keystone adjustment					Press to adjust image distortion caused by tilting
						the projector. (±20 degrees)
13	Up		and		Down	Press to select the OSD items.
14	Brightness and contrast					Press to control brightness and contrast, press
	control					or
								to adjust brightness or contrast, then press
							and		buttons to adjust the value.

24

Using Your Projector