Global Machinery Company PCH25 instruction

4) Service

a)Have your power tool serviced by a qualified repair personnel using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Additional safety rules for petrol chainsaws

Note. For safety reasons the chainsaw is shipped with the chain brake fully engaged. This brake must be released before the saw becomes operational.

•Never cut into the ground.

•Never cut into wire fences.

•Never cut into samplings.

•Never cut into prepared wood.

•Use the chainsaw to cut only wood.

•It is advisable to provide a support for the chainsaw when cutting branches. Do not cut using the bar point and beware of branches under tension.

•Children under 18 must not use chainsaws.

•Keep people away from the chainsaw when in use.

•Check the following conditions before beginning work:

–There should be no people in the felling area.

–Make sure there is a second person within calling distance.

–The working area should be free from obstacles.

•Wear suitable clothes which do not hinder movement.

•Use specific protection during operations involving head, hands, feet, eyes and ears.

•It is recommended the use of a helmet with a visor during felling, branch cutting and chopping operations.

•Wear gloves with an external protection when using the chainsaw.

•Use ear protection to prevent hearing injuries.

•Wear safety boots when using the chainsaw.

•During transport the brake must be applied to avoid accidental start-up.

•Do not use the chainsaw in rainy or windy conditions or in poor light.

•Find a suitable position before beginning work.

•When working on slopes, the saw operator must stand beside or above the wood to cut, i.e. felled trees.

•Use the chainsaw holding it firmly with both hands.

•Make a wedge-shaped cut before felling the tree, then the felling cut leaving a hinge for the felling direction.

•Beware of any falling branches after felling operations.

•Beware of wood splinters when cutting chopped wood.

•Ensure your chainsaw is suitable for the job.

•Never work above shoulder level or reach out to cut a branch: ensure you have stable footing at all times.

•Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol fumes, leaking gas or explosive dust.

•Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous concentrations.

•Protect your tool. This chainsaw is NOT WEATHERPROOF and should not be exposed to direct sunlight, high ambient temperature and damp, wet or high humidity conditions.

•Take care not to spill fuel. When refuelling the chainsaw ensure that the motor has been switched off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the engine running.

•Be careful where you store the chainsaw. Store the tool in a dry area away from flammable liquids.

•Keep your distance. The chainsaw emits exhaust fumes. Ensure bystanders keep a safe distance.

•Operating instructions and instructions for common cutting tasks, including the use of personal protection equipment, the need for adequate training and the risks involved when operating the unit while tired, ill or under the influence of alcohol or other drugs.

PCH25 specifications

Global Machinery Company PCH25 is a leading player in the construction and heavy machinery sector, renowned for its robust and versatile equipment. The PCH25 model encapsulates the company's commitment to innovation, efficiency, and reliability, making it a preferred choice for contractors and builders worldwide.

One of the standout features of the PCH25 is its powerful engine, which provides exceptional horsepower and torque, enabling it to handle demanding tasks in various terrains. This model is equipped with an advanced hydraulic system that allows for smooth operation and precise control, enhancing productivity on the job site. The hydraulic system is complemented by a quick-attach interface, which facilitates rapid changeover between attachments, thereby maximizing versatility and minimizing downtime.

The PCH25 integrates cutting-edge technology to improve performance and efficiency. Its onboard diagnostic system offers real-time data on machine health, allowing operators to monitor key performance indicators and schedule maintenance proactively. This feature not only extends the lifespan of the machinery but also reduces operational costs by preventing unexpected breakdowns.

Another notable characteristic of the PCH25 is its ergonomic design. The operator's cabin is spacious and fitted with user-friendly controls, ensuring comfort during long working hours. Additionally, the cabin is designed to provide excellent visibility, which enhances safety on the job site by allowing operators to maintain awareness of their surroundings.

The PCH25 also adheres to strict environmental standards, making it a sustainable option for construction projects. Its fuel-efficient engine reduces emissions and decreases the carbon footprint, aligning with the industry's growing focus on eco-friendly practices.

Durability is a hallmark of the PCH25, with its robust construction designed to withstand the rigors of daily use in harsh conditions. The model is built with high-quality materials that resist wear and tear, ensuring long-term reliability and reduced maintenance needs.

In summary, the Global Machinery Company PCH25 is a state-of-the-art machine that combines power, efficiency, and user-centric design. Its advanced technologies, ergonomic features, and environmental sustainability make it a solid investment for construction professionals seeking to enhance their operational capabilities. With the PCH25, users can expect unmatched performance and reliability, driving their projects to successful completion.