Global Machinery Company PCH25 instruction manual Unpacking, Contents of carton

Page 7

•Ensure you use oil-mix fuel. Ensure that you mix 35 parts unleaded fuel to 1 part 2-stroke oil. If not, the engine will overheat and cause damage to your chainsaw.

•Never fill fuel tank indoors. Never fill fuel tank when engine is running or hot. Do not smoke when filling fuel tank.

Kickback safety precautions

•Kickback may occur when the tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain.

•If the bar tip or point contacts, it can produce a rapid reverse reaction, kicking the guide bar up and back towards the operator. This is known as rotational kickback.

•Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator. This is known as pinch kickback.

•Either of these reactions can cause loss of control of the saw, resulting in serious personal injury.

•Do not rely exclusively on the safety devices built into your saw. Take the following steps to help avoid accident or injury:

•Reduce the element of surprise by understanding what causes kickback.

•Keep a firm grip on the chainsaw using both hands, the right hand on the rear handle and the left hand on the front handle when the motor is running. A firm grip will help maintain control. Do not let go whilst the motor is running.

•Make sure that the area of operation is free of obstructions. Do not let the point of the guide bar contact a log, branch or any other object.

•Use high speeds when cutting.

•Do not overreach or cut above shoulder height.

•Carefully follow the sharpening and maintenance instructions given in this manual.

•Use only replacement bars and chains specified by the manufacturer.

DANGER!

BEWARE OF KICKBACK!

WARNING! Kickback can lead to dangerous loss of control of the chainsaw and result in serious or fatal injury to the saw operator or to anyone standing close by. Always be alert. Rotational kickback and pinch kickback are major chainsaw operational dangers and the leading cause of most accidents.

Unpacking

Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.

Contents of carton

The GMC Petrol Chainsaw is supplied with the following accessories as standard.

•Chain

•Guide bar

•Double ended wrench

•Screwdriver

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Compact Chainsaw Contents Introduction Description of symbolsEnvironmental protection Specifications Symbols on the machineGeneral safety instructions Use the chainsaw holding it firmly with both hands Additional safety rules for petrol chainsawsUnpacking Contents of carton11 10 Know your productInstalling the guide bar and chain Mixing fuel 351 mixing ratio Filling up with fuel and oilFuelling the chainsaw Adding chain oil Starting the chainsawChain brake Adjusting the carburettorStopping the chainsaw Checking the oil supplyFelling a tree OperationHelpful hints Guard against kickbackBucking MaintenanceMaintenance to be preformed after each use LimbingGuide bar wear Chain sharpeningGMC customer assist

PCH25 specifications

Global Machinery Company PCH25 is a leading player in the construction and heavy machinery sector, renowned for its robust and versatile equipment. The PCH25 model encapsulates the company's commitment to innovation, efficiency, and reliability, making it a preferred choice for contractors and builders worldwide.

One of the standout features of the PCH25 is its powerful engine, which provides exceptional horsepower and torque, enabling it to handle demanding tasks in various terrains. This model is equipped with an advanced hydraulic system that allows for smooth operation and precise control, enhancing productivity on the job site. The hydraulic system is complemented by a quick-attach interface, which facilitates rapid changeover between attachments, thereby maximizing versatility and minimizing downtime.

The PCH25 integrates cutting-edge technology to improve performance and efficiency. Its onboard diagnostic system offers real-time data on machine health, allowing operators to monitor key performance indicators and schedule maintenance proactively. This feature not only extends the lifespan of the machinery but also reduces operational costs by preventing unexpected breakdowns.

Another notable characteristic of the PCH25 is its ergonomic design. The operator's cabin is spacious and fitted with user-friendly controls, ensuring comfort during long working hours. Additionally, the cabin is designed to provide excellent visibility, which enhances safety on the job site by allowing operators to maintain awareness of their surroundings.

The PCH25 also adheres to strict environmental standards, making it a sustainable option for construction projects. Its fuel-efficient engine reduces emissions and decreases the carbon footprint, aligning with the industry's growing focus on eco-friendly practices.

Durability is a hallmark of the PCH25, with its robust construction designed to withstand the rigors of daily use in harsh conditions. The model is built with high-quality materials that resist wear and tear, ensuring long-term reliability and reduced maintenance needs.

In summary, the Global Machinery Company PCH25 is a state-of-the-art machine that combines power, efficiency, and user-centric design. Its advanced technologies, ergonomic features, and environmental sustainability make it a solid investment for construction professionals seeking to enhance their operational capabilities. With the PCH25, users can expect unmatched performance and reliability, driving their projects to successful completion.
Top Page Image Contents