Global Machinery Company PCH25 instruction manual Starting the chainsaw, Adding chain oil

Page 11

Note: 1 Litre of unleaded fuel: 28.5ml of oil.

5 Litre of unleaded fuel: 145ml of oil

Adding chain oil

WARNING. Never start work unless the chain and bar are lubricated.

1.Place the chainsaw on its side with the oil cap facing up. Untwist and remove the oil tank cap (22).

2.Fill the tank to 80% capacity with chain oil.

3.Fasten the cap and wipe up any oil spillage.

Starting the chainsaw

WARNING. Do not start the motor whilst the saw hangs from one hand. This is very dangerous as the chain may come in contact with your body.

1.Fill the fuel and oil tanks respectively and tighten the caps securely.

2.Set the on/off switch (18) to On (the I position). Make sure the brake is ON when starting for safety, by pushing the front guard forward.

3.When the machine is cold first pull out the choke control (18) to the CHOKE position. (Fully withdrawn).

Note. Once the choke control has been pulled out, it cannot be pushed back to the run position.

4.Depress the priming bulb (29)

6 times or when the bulb is full of fuel.

Note. This is not required if engine is warm or is being restarted.

It returns automatically when the trigger switch is operated.

5.Hold the chainsaw securely on the ground and pull vigorously on the recoil starter (13).

Repeat (at least 15 times) until the engine “kicks” (attempts to start).

6.With the lock off switch (20) held depressed slightly pull on the trigger switch (19) and then release it. The choke control will click back one position.

7.Pull the recoil starter (13) again and restart the engine. Allow the engine to warm up.

8.When the engine is warm first depress the lock off switch then pull fully on the trigger

switch for a short burst. The choke control will fully retract to the RUN position, your chainsaw is now ready for use.

9.When restarting the engine when it is still warm, set the choke control to the START

position. Hold the chainsaw securely on the ground and

pull vigorously on the recoil starter (13). Allow the engine to run for a few moments with the trigger switch pulled slightly.

10.When the engine is fully

warm, pull on the trigger switch. The choke control will fully retract to the RUN position.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Compact Chainsaw Contents Environmental protection Description of symbolsIntroduction Specifications Symbols on the machineGeneral safety instructions Use the chainsaw holding it firmly with both hands Additional safety rules for petrol chainsawsUnpacking Contents of carton11 10 Know your productInstalling the guide bar and chain Fuelling the chainsaw Filling up with fuel and oilMixing fuel 351 mixing ratio Adding chain oil Starting the chainsawChain brake Adjusting the carburettorStopping the chainsaw Checking the oil supplyFelling a tree OperationHelpful hints Guard against kickbackBucking MaintenanceMaintenance to be preformed after each use LimbingGuide bar wear Chain sharpeningGMC customer assist

PCH25 specifications

Global Machinery Company PCH25 is a leading player in the construction and heavy machinery sector, renowned for its robust and versatile equipment. The PCH25 model encapsulates the company's commitment to innovation, efficiency, and reliability, making it a preferred choice for contractors and builders worldwide.

One of the standout features of the PCH25 is its powerful engine, which provides exceptional horsepower and torque, enabling it to handle demanding tasks in various terrains. This model is equipped with an advanced hydraulic system that allows for smooth operation and precise control, enhancing productivity on the job site. The hydraulic system is complemented by a quick-attach interface, which facilitates rapid changeover between attachments, thereby maximizing versatility and minimizing downtime.

The PCH25 integrates cutting-edge technology to improve performance and efficiency. Its onboard diagnostic system offers real-time data on machine health, allowing operators to monitor key performance indicators and schedule maintenance proactively. This feature not only extends the lifespan of the machinery but also reduces operational costs by preventing unexpected breakdowns.

Another notable characteristic of the PCH25 is its ergonomic design. The operator's cabin is spacious and fitted with user-friendly controls, ensuring comfort during long working hours. Additionally, the cabin is designed to provide excellent visibility, which enhances safety on the job site by allowing operators to maintain awareness of their surroundings.

The PCH25 also adheres to strict environmental standards, making it a sustainable option for construction projects. Its fuel-efficient engine reduces emissions and decreases the carbon footprint, aligning with the industry's growing focus on eco-friendly practices.

Durability is a hallmark of the PCH25, with its robust construction designed to withstand the rigors of daily use in harsh conditions. The model is built with high-quality materials that resist wear and tear, ensuring long-term reliability and reduced maintenance needs.

In summary, the Global Machinery Company PCH25 is a state-of-the-art machine that combines power, efficiency, and user-centric design. Its advanced technologies, ergonomic features, and environmental sustainability make it a solid investment for construction professionals seeking to enhance their operational capabilities. With the PCH25, users can expect unmatched performance and reliability, driving their projects to successful completion.
Top Page Image Contents