IPPC-9151 Series Users Manual 42
Chapter 7 Audio Setup7.1 Introduction
The IPPC-9151's on-board audio interface provides high-quality stereo
sound and FM music synthesis (ESFM) by using the VIA VT82C686
audio controller from VIA. The audio interface can record, compress, and
play back voice, sound, and music with built-in mixer control.
The IPPC-9151 on board audio interface also supports the Plug & Play
(PnP) standard and provides PnP configuration for the audio, FM, and
MPU-104 logical devices. It is compatible with Sound Blaster™; Sound
Blaster Pro™ version 3.01, voice and music functions. The ESFM syn-
thesizer is register compatible with the OPL3 and has extended capabili-
ties.
7.2 Installation of the Audio Driver
Before installing the audio driver, please take note of the procedures
detailed below. You must know which operating system you are using in
your IPPC-9151, and then refer to the corresponding installation flow
chart. Just follow the steps in the flow chart. You can quickly and suc-
cessfully complete the installation, even though you are not familiar with
instructions for Windows.
Notes: 1. The windows illustrations in this chapter are
intended as examples only. Please follow the
listed steps, and pay attention to the instructions
which appear on your screen.
2. For convenience, the CD-ROM drive is desig-
nated as "D" throughout this chapter.
3. <Enter> means pressing the “Enter” key on
the keyboard.