87 Chapter 10
Video Off Method
This determines the manner in which the monitor is blanked.
MODEM Use IRQ
This determines the IRQ which the MODEM can use.
The choices: 3; 4; 5; 7; 9; 10; 11; NA.
Soft-Off by PWRBTN
When Enabled, turning the system off with the on/ off button places the
system in a very low-powerusage state, with only enough circuitry receiv-
ing power to detect power button activity or Resume by Ring activity.
WAKE UP EVENTS
When this option is chosen, the following item appears for user’s config-
uration.
• VGA: When Enabled, you can set the VGA awakens the system.
• LPT & COM: When LPT & COM is ON, any activity from one of the
listed system peripheral devices or IRQs wakes up the system.
• HDD & FDD: When HDD & FDD is ON, any activity from one of the
listed system peripheral devices wakes up the system.
• PCI Master: When PCI Master is ON, any activity from one of the
listed system peripheral devices wakes up the system.
V/H SYNC + Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to
video buffer.
Blank Screen This option only writes blanks to the video buffer.
DPMS Supports
Select this option if you monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Electronics
Standards to select video power management values.
VG A O ff Item He lp
LPT & COM
HDD & FDD
PCI Master
IRQs A cti vit y
Monitori ng
LPT/COM
On
Off
Press Enter
Menu Level