Advantech IPPC-9151 Series 10.7 PnP/PCI Configuration, PNP OS Installed, Reset Configuration Data

10.7 PnP/PCI Configuration

PnP/PCI Configuration allows you to modify the system’s power saving functions.

Run the PnP/PCI Configuration as follows:

1.Choose“PnP/PCI Configuration”from the Main Menu and a list of options will appear.

2.Use one of the arrow keys to move between options and modify the selected options by using PgUp / PgDn / + / - keys.

PNP OS Installed	No
Reset Configuration Data	Disabled
Resources Controlled By	Auto(ESCD)
IRQ Resources	Press Enter
DMA Resources	Press Enter
PCI/VGA Palette Snoop	Disabled
Assign IRQ For VGA	Enabled
Assign IRQ For USB	Enabled

Item Help

Menu Level

PNP OS Installed

Select Yes if the system operating environment is Plug-and-Play aware (e.g. Windows 95).

Note:	BIOS will automatically disable all PnP resources
	except the boot device card when you select Yes
	on Non-PnP operating system.

Reset Configuration Data

Normally, you leave this Disabled. Select Enabled to reset Extended Sys- tem Configuration Data (ESCD), when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system cannot boot.

Resource Controlled By

The Plug and Play Award BIOS can automatically configure all the boot and Plug and Play-compatible devices. If you select Auto, all the interrupt request (IRQ) and DMA assignment fields disappear, as the BIOS auto- matically assigns them.

89 Chapter10