Global Machinery Company PCH25 Stopping the chainsaw, Checking the oil supply, Chain brake

Page 12

11.When ready to start cutting, release the brake, by pulling the front guard back.

Stopping the chainsaw

1.Release the trigger switch.

2.Set the on/off switch (18) to Off (the O position).

Checking the oil supply

Run the engine at medium speed and check that the chain splatters a thin line of oil which can be seen on the ground when the bar is pointed downwards. This is normal. If there is no line of chain oil, stop the motor immediately and investigate the cause. The oil tank could be empty or the oil supply to the chain blocked. This may require removal of the bar and checking that the upper oil hole in the bar is clear of any blockages.

Adjusting the carburettor

 

 

 

The carburettor is factory set and

 

 

 

 

 

 

 

 

L

T

H

should not require adjustment.

 

 

Changes in operating conditions may require fine tuning of the carburettor. Proceed as follows.

1.Stop the engine and screw in both the H and L needles (15) using screwdriver (28). Do not force.

2.Turn the H screw (15) back 3/4 of a turn.

3.Turn the L screw (16) back 1-1/2 turns.

4.Start the engine and let it warm up with the trigger switch half pulled in. When the engine is warm, release the trigger switch.

5.Turn the L screw (17) slowly clockwise until the idling speed is at its maximum then turn the screw back (anticlockwise) 1/4 of a turn.

6.Turn the idling adjusting screw (T) (14) anticlockwise until the chain does not turn.

7.If the idling speed is too slow, turn screw (T) clockwise.

8.Make a test cut and adjust screw (15) for best cutting power, not for maximum speed.

Chain brake

The chain brake operates automatically in the event of kickback. As the guide bar (1) kicks up, the wrist of the operator’s hand on the top handle knocks against the front guard (8) causing the front guard to move forward and activating the chain brake.

1.The chain brake can be operated manually by moving the front guard forward.

2.To release the chain brake, pull the front guard towards the top handle until a “click” is heard.

CAUTION. Check that the chain

brake is operating correctly each time the chainsaw is used.

Bucking spikes

The Chainsaw has bucking spikes (6) to assist with cutting and reduce the chance of kickback, use them as follows:

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Compact Chainsaw Contents Description of symbols IntroductionEnvironmental protection Symbols on the machine SpecificationsGeneral safety instructions Additional safety rules for petrol chainsaws Use the chainsaw holding it firmly with both handsContents of carton UnpackingKnow your product 11 10Installing the guide bar and chain Filling up with fuel and oil Mixing fuel 351 mixing ratioFuelling the chainsaw Starting the chainsaw Adding chain oilAdjusting the carburettor Stopping the chainsawChecking the oil supply Chain brakeOperation Helpful hintsGuard against kickback Felling a treeMaintenance Maintenance to be preformed after each useLimbing BuckingChain sharpening Guide bar wearGMC customer assist

PCH25 specifications

Global Machinery Company PCH25 is a leading player in the construction and heavy machinery sector, renowned for its robust and versatile equipment. The PCH25 model encapsulates the company's commitment to innovation, efficiency, and reliability, making it a preferred choice for contractors and builders worldwide.

One of the standout features of the PCH25 is its powerful engine, which provides exceptional horsepower and torque, enabling it to handle demanding tasks in various terrains. This model is equipped with an advanced hydraulic system that allows for smooth operation and precise control, enhancing productivity on the job site. The hydraulic system is complemented by a quick-attach interface, which facilitates rapid changeover between attachments, thereby maximizing versatility and minimizing downtime.

The PCH25 integrates cutting-edge technology to improve performance and efficiency. Its onboard diagnostic system offers real-time data on machine health, allowing operators to monitor key performance indicators and schedule maintenance proactively. This feature not only extends the lifespan of the machinery but also reduces operational costs by preventing unexpected breakdowns.

Another notable characteristic of the PCH25 is its ergonomic design. The operator's cabin is spacious and fitted with user-friendly controls, ensuring comfort during long working hours. Additionally, the cabin is designed to provide excellent visibility, which enhances safety on the job site by allowing operators to maintain awareness of their surroundings.

The PCH25 also adheres to strict environmental standards, making it a sustainable option for construction projects. Its fuel-efficient engine reduces emissions and decreases the carbon footprint, aligning with the industry's growing focus on eco-friendly practices.

Durability is a hallmark of the PCH25, with its robust construction designed to withstand the rigors of daily use in harsh conditions. The model is built with high-quality materials that resist wear and tear, ensuring long-term reliability and reduced maintenance needs.

In summary, the Global Machinery Company PCH25 is a state-of-the-art machine that combines power, efficiency, and user-centric design. Its advanced technologies, ergonomic features, and environmental sustainability make it a solid investment for construction professionals seeking to enhance their operational capabilities. With the PCH25, users can expect unmatched performance and reliability, driving their projects to successful completion.
Top Page Image Contents