8.INSTALLATION AND WIRING

1.Before Starting

Read these instructions and the following precautions care- fully.

WARNING!

Be sure to disconnect the battery (-) terminal before starting. This is to prevent short circuits during installa- tion.

Precautions

This unit is exclusively for cars with a negative ground, 12V power supply.

Do not open the case. There are no user-serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center.

18VS735

Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzene, alcohol, or other solvent. For tough dirt, apply a small amount of cold or warm water to a soft cloth and gently wipe.

2. Package Contents

1VS735R disc unit

2DCP Case

3IR Remote control

4(2) AAA Alkaline Batteries (for remote control)

5Trim Bezel

6DIN Mounting Sleeve and release tools

7(4) M4x6 Truss-head machine screws

8(4) M5x5 Truss-head machine screws

9(4) M5x5 Flat-head machine screws

10(4) M5×18 Hexagon washer-head tapping screws

11(2) M5 Hexagon nuts

12(1) Plain washer

13(1) Spring washer

145-meter 4-pin Power Supply harness

155-meter RCA Audio Cable

165-meter RCA Video Cable

17Additional IR Receiver (with 5-meter cable)

18Installation Brackets

19Backstrap

20Owner’s Manual / Installation Guide

Page 18
Image 18
Clarion VS735 specifications Installation and Wiring, Before Starting, Package Contents