USER’S MANUAL
120V AC/DC POWERED 135ºF FIXED AND 15ºF/MINUTE
120V AC ~ 60 Hz 0.07Amps
IMPORTANT!
PLEASE READ CAREFULLY AND SAVE.
This user’s manual contains important information about your Heat Alarm’s operation. If you are installing this Heat Alarm for use by others, you must leave this
|
| Model |
| HD6135FB | |
|
|
|
THIS USER’S MANUAL HAS BEEN RESIZED TO PRINT OUT ON
BLACK page numbers reference the original printed document.
RED page numbers reference this web version.
TABLE OF CONTENTS |
|
Basic Features | . . . . .1 |
Fire Safety Tips | . . . . .1 |
Before You Install This Heat Alarm | . . . . .1 |
How This Heat Alarm Works | |
How To Install This Heat Alarm | |
Locking Features | |
Weekly Testing | . . . . .4 |
Regular Maintenance | . . . . .4 |
If You Suspect a Problem | . . . . .4 |
Understanding the Indicator Lights and Alarm Horn Patterns . . . . | . . . . .5 |
If This Heat Alarm Sounds | . . . . .5 |
What To Do In Case Of Fire | . . . . .5 |
Using the Silence Features | . . . . .5 |
Latching Alarm Indicator | . . . . .5 |
Recommended Locations For Heat
Locations To Avoid For Heat
Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Limitations of Heat Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Limited
All Rights Reserved. © 2002 BRK Brands, Inc.
BRK Electronics®, 3901 Liberty Street Road, Aurora, IL
Consumer Affairs: (800)
BASIC FEATURES
135ºF Fixed and 15ºF/Minute Rate of
Exclusive IR* Remote Control
Latching Alarm
Basic Features, Continued
Two Silence Features:
1.Temporarily silences the low battery chirp for up to 8 hours without removing the battery.
2.Temporarily silences an unwanted nuisance alarm for up to 15 minutes.
Battery
*Infrared (IR) remote controls like those used for TV’s and VCRs.
FIRE SAFETY TIPS
Follow safety rules and prevent hazardous situations: 1) Use smoking materials properly. Never smoke in bed.
2)Keep matches or lighters away from children; 3) Store flammable materials in proper containers; 4) Keep elec- trical appliances in good condition and don’t overload electrical circuits; 5) Keep stoves, barbecue grills, fire- places and chimneys grease- and
7)Keep portable heaters and open flames, like candles, away from flammable materials; 8) Don’t let rubbish accumulate.
Keep alarms clean, and test them weekly. Replace alarms immediately if they are not working properly. Heat and Smoke Alarms that do not work cannot alert you to a fire. Keep at least one working fire extinguisher on every floor, and an additional one in the kitchen. Have fire escape ladders or other reliable means of escape from an upper floor in case stairs are blocked.
BEFORE YOU INSTALL THIS HEAT ALARM
IMPORTANT! Read “Recommended Locations for Heat Alarms” and “Locations to Avoid for Heat Alarms” before beginning. This unit monitors the air, and when heat reaches its sensing chamber, it alarms. It can give you more time to escape before fire spreads. This unit can ONLY give an early warning of developing fires if it is installed, maintained and located where heat can reach it, and where all residents can hear it, as described in this manual. This unit will not sense gas, smoke, or flame. It cannot prevent or extinguish fires.
Know Where To Install Your Heat Alarms
See “Recommended Locations For Heat Alarms” and “Locations To Avoid For Heat Alarms” for details.
Know What Heat Alarms Can and Can’t Do
A Heat Alarm can help alert you to fire, giving you precious time to escape. It can only sound an alarm once heat reaches the sensor. See “Limitations of Heat Alarms” for details.
Check Your Local Building Codes
This Heat Alarm is designed to be used in a typical
•This device is not intended to alert hearing impaired residents. Smoke Alarms specifically designed for the hearing impaired, which feature devices like flashing strobe lights, are available to alert the hearing impaired in case of fire.
•Installation of this Heat Alarm must conform to the electrical codes in your area; Article 760 of the National Electrical Code, NFPA 72, 101; SBC (SBCCI); UBC (ICBO); NBC (BOCA); OTFDC (CABO), and any other local or building codes that may apply. Wiring and installation must be performed by a licensed electrician. Failure to follow these guidelines may result in injury or property damage.
•This Heat Alarm is not a Smoke Alarm. This unit is not suitable protection when used alone. Do not use this unit as the only means of fire detection in a home. This unit is intended for use as a supplement to Smoke Alarms.
•This Heat Alarm must have AC or battery power to operate. If the AC power fails, battery
•This unit must be powered by a
•Never disconnect the power from an AC powered unit to stop an unwanted alarm. Doing so will dis- able the unit and remove your protection. In the case of a true unwanted alarm, use the Silence Feature by using an IR remote control or by pressing the Test/Silence button or fan the heat away from the unit. The alarm will reset automatically when it returns to normal operation.
•NEVER ignore any alarm. Read “If Your Heat Alarm Sounds” for more information on how to respond to an alarm. Failure to respond can result in injury or death.
•Test this Heat Alarm once a week. If it ever fails to test correctly, have it replaced immediately! If the Alarm is not working properly, it cannot alert you to a problem.
•Connect this Heat Alarm ONLY to other compatible units. See “How to Interconnect Multiple Heat Alarms or Heat Alarms to Smoke Alarms” for details. Do not connect it to any other type of alarm or auxiliary device. Connecting anything else to this unit may damage it or prevent it from operat- ing properly.
•DO NOT stand too close to the unit when the alarm is sounding. It is loud to alert you in an emer- gency. Exposure to the horn at close range may harm your hearing. When testing the unit, step back when the horn starts sounding.
•Do not paint over the Heat Alarm. Paint may clog the openings to the sensor and prevent the Heat Alarm from operating properly.
1