Echo ECS-2000 manual Troubleshooting, Observed Fault Possible Cause Remedy

Page 15

TROUBLESHOOTING

WARNING

Unplug chain saw from power source before servicing. Severe injury or death could occur from electrical shock or body contact with moving chain.

OBSERVED FAULT

POSSIBLE CAUSE

REMEDY

Saw runs, but does not cut.

Chain assembled backwards on guide bar.

See Assembly, page 6.

Saw does not cut unless heavily forced.

Chain is dull.

Cutting produces only sawdust with few

 

large chips.

 

See Sharpening Your Saw Chain, page 12.

Saw runs slow. Saw stalls easily.

Low power supply voltage.

Extension cord wire size too

 

 

small. See Extension Cords, page 8.

 

 

 

Motor of saw does not run when you

Switch lockout not pressed in to release

Press in switch lockout before squeez-

squeeze trigger.

trigger.

ing trigger.

 

Chain brake activated.

Release trigger and move front hand

 

 

guard back towards rear of saw.

 

Extension cord connections

Check cord connections.

 

loose.

 

 

Open line fuse or circuit

Check line fuse or circuit

 

breaker.

breaker.

 

Bad motor brushes.

Contact authorized service person.

 

Open wiring circuit on saw.

Contact authorized service person.

 

 

 

Motor of saw runs, but chain does not

Gear train failure.

Contact authorized service person.

move.

 

 

 

 

 

Chain does not get oil.

Clogged oil slot in guide bar. Oil is too thick.

Remove guide bar and clean oil slot.

Use correct weight of oil. See Filling Oil Tank, page 7.

Chain comes off guide bar.

Chain is loose.

Tighten chain. See Saw

 

 

Chain Tension Adjustment, page 7.

 

Guide bar and chain not assembled

See Assembly, page 6.

 

right.

 

 

 

 

Saw smokes.

Saw damaged. Do not use saw.

Contact authorized service person.

 

 

 

Saw leaks oil.

Oil cap is not secure.

Tighten oil cap.

 

 

Note: Empty oil tank

 

 

when not in use.

 

 

 

Chain brake does not stop saw chain.

Brake failure.

Contact authorized service person.

102514

15

Image 15
Contents Electric Chain Saw Information SymbolsCause Of Kickback Safety WarningsBefore Operating Chain SAW KickbackCause Of Pushback and Pull-In Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Pushback and PULL-INChain SAW Names and Terms Product IdentificationUnpacking AssemblyGuide Bar Nuts Correct Gap Tension Incorrect Tension SAW Chain Tension AdjustmentFilling OIL Tank Operating Chain SAWChain Brake Extension CordsOiling Chain Cutting with the Chain SAWRetreat Path Direction of Fall Tree Trimming a Tree PruningFelling a Tree Cutting Down a Tree Before Felling a TreeLimbing a Tree Felling ProcedureLog Supported On Both Ends Bucking a LOGLog Supported On One End Entire Length Of Log On GroundSharpening Your SAW Chain Cleaning and MaintenanceCleaning SAW Body Care of Guide BARDepth Gauge Flat File Tool Slot Sharpening CuttersFiling Cutter Depth Gauges Right side of chainReplacement Parts StorageReplacing Saw Chain Observed Fault Possible Cause Remedy TroubleshootingDEALER?

ECS-2000 specifications

The Echo ECS-2000 is a versatile and powerful chainsaw designed to meet the needs of both professionals and enthusiasts in the realm of outdoor power equipment. With its combination of advanced technologies and robust features, the ECS-2000 stands out as a reliable choice for various cutting tasks.

One of the main features of the ECS-2000 is its high-performance engine. Powered by a 20.1 cc, 2-stroke engine, this chainsaw delivers impressive cutting power while remaining lightweight and easy to maneuver. The engine is engineered to provide efficient fuel consumption, reducing emissions and making it an environmentally friendly option for users who prioritize sustainability.

The ECS-2000 also incorporates Echo's Advanced Vibration Reduction (AVR) technology, which minimizes vibrations during operation. This feature not only enhances user comfort, allowing for longer periods of usage without fatigue, but also contributes to better precision and control when making cuts. The comfortable grip design further complements this feature, ensuring a secure hold even in challenging conditions.

Another notable characteristic of the Echo ECS-2000 is its adjustable automatic oiler. This innovative system allows users to customize the oil delivery based on the material being cut, optimizing chain lubrication and extending the life of the chain. This ensures optimal performance during operation and reduces the frequency of maintenance, making the ECS-2000 a low-maintenance option.

The chainsaw is equipped with a lightweight yet durable chassis, constructed from high-quality materials that are designed to withstand rigorous use in various environments. This durability is complemented by a chain brake system for added safety, providing instant stopping power if kickback occurs.

The ECS-2000 also features a tool-less air filter cover, allowing for quick and easy access for maintenance and cleaning. This user-friendly design ensures that operators can keep their equipment in top condition with minimal effort.

In summary, the Echo ECS-2000 is a powerful and efficient chainsaw that balances performance with user comfort and safety. Its advanced engine technology, ergonomic design, customizable oiling system, and overall durability make it an excellent choice for anyone looking to tackle demanding cutting tasks with ease. Whether for professional use or home garden projects, this chainsaw delivers the reliability and efficiency that users expect from Echo.