Echo ECS-2000 manual Product Identification, Chain SAW Names and Terms

Page 5

PRODUCT IDENTIFICATION

Front Hand

Guard

Kick Guard

Saw

Chain

Rear

Handle

Guide Bar

Nose

Guide Bar

Spike

Rear Hand

Guard

Power Cord

Scabbard

Oil Level Sight Hole

Kick Guard(located on saw body, hidden by front handle)

Oil Cap

Switch

Lockout

Front

Handle

Motor

Trigger

Housing

 

Figure 2 - Electric Chain Saw

CHAIN SAW NAMES AND TERMS

Bucking Process of cutting a felled tree or log into lengths.

Felling Process of cutting down a tree.

Felling Cut Final cut when felling a tree. Make this cut on opposite side of tree from notching cut.

Front Hand Guard Shield between front handle and guide bar. Protects left hand while using saw. When kickback occurs, the front hand guard is moved forward by the back of operator’s left hand. This stops the saw chain quickly, reducing the chance of serious injury.

Front Handle Located at front of saw body.

Guide Bar Metal bar that extends from saw body. The guide bar supports and guides chain.

Guide Bar Nose Tip or end of guide bar.

Kickback Quick backward and upward motion of guide bar. Kickback may occur when tip of guide bar touches an object while chain is moving. The guide bar will kick up and back towards operator.

Kick Guard Covers the nose area of the bar and chain where kickback reaction is generated. No chain contact in this area. No rotational kickback.

Limbing Process of cutting limb(s) from a felled tree.

Low-Kickback Chain Chain that reduces chance of kickback as required by ANSI B175.1.

Normal Cutting Position Stance used while making bucking and felling cuts.

Notching Cut Notch cut in tree that directs fall of tree.

Oiler Control System for oiling guide bar and chain.

Power Head Chain saw without chain and guide bar. Also known as saw body.

Pushback (Kickback, Pinch) Rapid pushback of chain saw. Pushback may occur if chain along top of guide bar is pinched, caught, or contacts a foreign object.

Rear Handle Handle located at rear of saw body.

Reduced Kickback Guide Bar Guide bar that reduces chance of kickback.

Replacement Chain Chain that complies with ANSI B175.1 when used with a specific saw. It may not meet ANSI require- ments when used with other saws.

Saw Chain (Chain) Loop of chain having cutting teeth for cutting wood. The motor drives chain. The guide bar supports chain.

Spiked Bumper (Spike) Pointed teeth at front of saw body beside guide bar. Keep spiked bumper in contact with wood when felling or bucking. It helps maintain position of saw while cutting.

Sprocket Toothed wheel that drives chain.

Switch Device that completes or interrupts electrical circuit to motor of saw.

Switch Linkage This device connects switch to trigger. It moves switch when you squeeze trigger.

Switch Lockout Device that reduces accidental starting of saw.

Trigger Device that turns saw on and off. Squeezing trigger turns saw on. Releasing trigger turns saw off.

Trimming (Pruning) Process of cutting limb(s) from a living tree.

Undercut An upward cut from underside of log or limb. This is done while in normal cutting position and cutting with top of guide bar.

102514

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Electric Chain Saw Information SymbolsBefore Operating Chain SAW Safety WarningsKickback Cause Of KickbackMaintenance and Storage of Chain SAW Saw Maintenance and Kickback SafetyPushback and PULL-IN Cause Of Pushback and Pull-InChain SAW Names and Terms Product IdentificationUnpacking AssemblyFilling OIL Tank SAW Chain Tension AdjustmentOperating Chain SAW Guide Bar Nuts Correct Gap Tension Incorrect TensionOiling Chain Extension CordsCutting with the Chain SAW Chain BrakeFelling a Tree Cutting Down a Tree Trimming a Tree PruningBefore Felling a Tree Retreat Path Direction of Fall TreeLimbing a Tree Felling ProcedureLog Supported On One End Bucking a LOGEntire Length Of Log On Ground Log Supported On Both EndsCleaning SAW Body Cleaning and MaintenanceCare of Guide BAR Sharpening Your SAW ChainFiling Cutter Depth Gauges Sharpening CuttersRight side of chain Depth Gauge Flat File Tool SlotReplacing Saw Chain Replacement PartsStorage Observed Fault Possible Cause Remedy TroubleshootingDEALER?

ECS-2000 specifications

The Echo ECS-2000 is a versatile and powerful chainsaw designed to meet the needs of both professionals and enthusiasts in the realm of outdoor power equipment. With its combination of advanced technologies and robust features, the ECS-2000 stands out as a reliable choice for various cutting tasks.

One of the main features of the ECS-2000 is its high-performance engine. Powered by a 20.1 cc, 2-stroke engine, this chainsaw delivers impressive cutting power while remaining lightweight and easy to maneuver. The engine is engineered to provide efficient fuel consumption, reducing emissions and making it an environmentally friendly option for users who prioritize sustainability.

The ECS-2000 also incorporates Echo's Advanced Vibration Reduction (AVR) technology, which minimizes vibrations during operation. This feature not only enhances user comfort, allowing for longer periods of usage without fatigue, but also contributes to better precision and control when making cuts. The comfortable grip design further complements this feature, ensuring a secure hold even in challenging conditions.

Another notable characteristic of the Echo ECS-2000 is its adjustable automatic oiler. This innovative system allows users to customize the oil delivery based on the material being cut, optimizing chain lubrication and extending the life of the chain. This ensures optimal performance during operation and reduces the frequency of maintenance, making the ECS-2000 a low-maintenance option.

The chainsaw is equipped with a lightweight yet durable chassis, constructed from high-quality materials that are designed to withstand rigorous use in various environments. This durability is complemented by a chain brake system for added safety, providing instant stopping power if kickback occurs.

The ECS-2000 also features a tool-less air filter cover, allowing for quick and easy access for maintenance and cleaning. This user-friendly design ensures that operators can keep their equipment in top condition with minimal effort.

In summary, the Echo ECS-2000 is a powerful and efficient chainsaw that balances performance with user comfort and safety. Its advanced engine technology, ergonomic design, customizable oiling system, and overall durability make it an excellent choice for anyone looking to tackle demanding cutting tasks with ease. Whether for professional use or home garden projects, this chainsaw delivers the reliability and efficiency that users expect from Echo.
Top Page Image Contents