Echo ECS-2000 manual Unpacking, Assembly

Page 6

UNPACKING

1.Remove all items from carton.

2.Check all items for any shipping damage. If you find any damage or if any parts are missing, promptly inform dealer where you bought chain saw.

ASSEMBLY

!WARNING

 

Cutting

Towards

Edge

Guide

 

Bar Nose

Saw

Drive

Chain

Sprocket

 

Guide Bar

Bolts

Cutting edges on chain are sharp. Use protective gloves when handling chain.

IMPORTANT

Do not clamp chain saw in vise during assembly.

1.

Lay chain out flat.

2.

Remove guide bar nuts from guide bar bolts (see Figure 3).

3.

Turn adjusting screw counterclockwise (see Figure 4).

Guide Bar

Nuts

Sprocket

Support

Guide

Bar

Adjusting Hole

 

Continue to turn adjusting screw until adjusting block is to

 

rear of adjusting plate.

4.

Install guide bar onto saw body. Place rear of guide bar

 

between adjusting plate and sprocket support.

 

IMPORTANT: Make sure to insert adjusting block into

 

oval adjusting hole on guide bar.

5.

Attach guide bar nuts to guide bar bolts. IMPORTANT:

 

Tighten guide bar nuts finger tight only. Make sure

 

adjusting block is in oval adjusting hole on guide bar.

6.

Place chain around drive sprocket, then along top groove

 

of guide bar and around guide bar nose. Note: Make sure

 

cutting edges of chain are facing the right direction.

 

Position chain so cutting edges on top of guide bar face

 

guide bar nose (see Figure 3).

!CAUTION

Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not cut.

7.Adjust saw chain tension. Follow steps under Saw Chain Tension Adjustment, page 7.

8.If saw has 2-piece side cover, attach sprocket cover.

Figure 3 - Assembling Guide Bar, Chain, and Hand Guard

Sprocket

Support

Adjusting

Adjusting

Block

Plate

Adjusting

Screw

Figure 4 - Part Locations for Assembling Guide Bar

6

102514

Image 6
Contents Electric Chain Saw Symbols InformationKickback Safety WarningsBefore Operating Chain SAW Cause Of KickbackPushback and PULL-IN Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Cause Of Pushback and Pull-InProduct Identification Chain SAW Names and TermsAssembly UnpackingOperating Chain SAW SAW Chain Tension AdjustmentFilling OIL Tank Guide Bar Nuts Correct Gap Tension Incorrect TensionCutting with the Chain SAW Extension CordsOiling Chain Chain BrakeBefore Felling a Tree Trimming a Tree PruningFelling a Tree Cutting Down a Tree Retreat Path Direction of Fall TreeFelling Procedure Limbing a TreeEntire Length Of Log On Ground Bucking a LOGLog Supported On One End Log Supported On Both EndsCare of Guide BAR Cleaning and MaintenanceCleaning SAW Body Sharpening Your SAW ChainRight side of chain Sharpening CuttersFiling Cutter Depth Gauges Depth Gauge Flat File Tool SlotReplacement Parts StorageReplacing Saw Chain Troubleshooting Observed Fault Possible Cause RemedyDEALER?

ECS-2000 specifications

The Echo ECS-2000 is a versatile and powerful chainsaw designed to meet the needs of both professionals and enthusiasts in the realm of outdoor power equipment. With its combination of advanced technologies and robust features, the ECS-2000 stands out as a reliable choice for various cutting tasks.

One of the main features of the ECS-2000 is its high-performance engine. Powered by a 20.1 cc, 2-stroke engine, this chainsaw delivers impressive cutting power while remaining lightweight and easy to maneuver. The engine is engineered to provide efficient fuel consumption, reducing emissions and making it an environmentally friendly option for users who prioritize sustainability.

The ECS-2000 also incorporates Echo's Advanced Vibration Reduction (AVR) technology, which minimizes vibrations during operation. This feature not only enhances user comfort, allowing for longer periods of usage without fatigue, but also contributes to better precision and control when making cuts. The comfortable grip design further complements this feature, ensuring a secure hold even in challenging conditions.

Another notable characteristic of the Echo ECS-2000 is its adjustable automatic oiler. This innovative system allows users to customize the oil delivery based on the material being cut, optimizing chain lubrication and extending the life of the chain. This ensures optimal performance during operation and reduces the frequency of maintenance, making the ECS-2000 a low-maintenance option.

The chainsaw is equipped with a lightweight yet durable chassis, constructed from high-quality materials that are designed to withstand rigorous use in various environments. This durability is complemented by a chain brake system for added safety, providing instant stopping power if kickback occurs.

The ECS-2000 also features a tool-less air filter cover, allowing for quick and easy access for maintenance and cleaning. This user-friendly design ensures that operators can keep their equipment in top condition with minimal effort.

In summary, the Echo ECS-2000 is a powerful and efficient chainsaw that balances performance with user comfort and safety. Its advanced engine technology, ergonomic design, customizable oiling system, and overall durability make it an excellent choice for anyone looking to tackle demanding cutting tasks with ease. Whether for professional use or home garden projects, this chainsaw delivers the reliability and efficiency that users expect from Echo.