Echo ECS-2000 manual SAW Chain Tension Adjustment, Filling OIL Tank, Operating Chain SAW

Page 7

SAW CHAIN TENSION

ADJUSTMENT

!WARNING

Unplug chain saw from power source before adjusting saw chain tension.

!WARNING

Cutting edges on chain are sharp. Use protective gloves when handling chain.

!WARNING

Maintain proper chain tension always. A loose chain will increase the risk of kickback. A loose chain may jump out of guide bar groove. This may injure operator and damage chain. A loose chain will cause chain, guide bar, and sprocket to wear rapidly.

Note: A new chain will stretch. Check new chain after first few minutes of operation. Allow chain to cool down. Follow steps below to readjust saw chain tension.

1.Before adjusting chain, make sure guide bar nuts are only finger tight (see Figure 3, page 6). Also make sure adjust- ing block is in oval adjusting hole on guide bar (see Figure 3 and 4, page 6).

2.Turn adjusting screw clockwise until all slack is out of chain (see Figure 5).

Note: There should be no gap between side links of chain and bottom of guide bar (see Figure 6).

3.Wearing protective gloves, move chain around guide bar. Chain should move freely. If chain does not move freely, loosen chain by turning adjusting screw counterclockwise.

4.After chain tension is correct, tighten guide bar nuts firmly. If not, guide bar will move and loosen chain tension. This will increase the risk of kickback. This can also damage saw. Note: A new chain will stretch. Check new chain after first few minutes of operation. Allow chain to cool down. Readjust chain tension.

Guide Bar

Nuts

 

Guide Bar

Guide Bar

Correct

Gap

Tension

Incorrect Tension

Figure 6 - Saw Chain Adjustment

FILLING OIL TANK

1.Remove oil cap.

2.Fill oil tank with Echo bar and chain oil.

3.Replace oil cap at once. Tighten oil cap firmly for good seal. This will avoid oil seepage from tank.

4.Wipe off excess oil.

Note: It is normal for oil to seep when saw is not in use. Empty oil tank after each use to prevent seepage.

OPERATING CHAIN SAW

!WARNING

Read and understand this owner’s manual before operating this saw. Make certain you read and understand all Safety Warnings. Improper use of this chain saw can cause severe injury or death from fire, electrical shock, or body contact with moving chain, or falling wood.

Figure 5 - Turning Adjusting Screw

Continued

102514

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Electric Chain Saw Information SymbolsCause Of Kickback Safety WarningsBefore Operating Chain SAW KickbackCause Of Pushback and Pull-In Saw Maintenance and Kickback SafetyMaintenance and Storage of Chain SAW Pushback and PULL-INChain SAW Names and Terms Product IdentificationUnpacking AssemblyGuide Bar Nuts Correct Gap Tension Incorrect Tension SAW Chain Tension AdjustmentFilling OIL Tank Operating Chain SAWChain Brake Extension CordsOiling Chain Cutting with the Chain SAWRetreat Path Direction of Fall Tree Trimming a Tree PruningFelling a Tree Cutting Down a Tree Before Felling a TreeLimbing a Tree Felling ProcedureLog Supported On Both Ends Bucking a LOGLog Supported On One End Entire Length Of Log On GroundSharpening Your SAW Chain Cleaning and MaintenanceCleaning SAW Body Care of Guide BARDepth Gauge Flat File Tool Slot Sharpening CuttersFiling Cutter Depth Gauges Right side of chainStorage Replacement PartsReplacing Saw Chain Observed Fault Possible Cause Remedy TroubleshootingDEALER?

ECS-2000 specifications

The Echo ECS-2000 is a versatile and powerful chainsaw designed to meet the needs of both professionals and enthusiasts in the realm of outdoor power equipment. With its combination of advanced technologies and robust features, the ECS-2000 stands out as a reliable choice for various cutting tasks.

One of the main features of the ECS-2000 is its high-performance engine. Powered by a 20.1 cc, 2-stroke engine, this chainsaw delivers impressive cutting power while remaining lightweight and easy to maneuver. The engine is engineered to provide efficient fuel consumption, reducing emissions and making it an environmentally friendly option for users who prioritize sustainability.

The ECS-2000 also incorporates Echo's Advanced Vibration Reduction (AVR) technology, which minimizes vibrations during operation. This feature not only enhances user comfort, allowing for longer periods of usage without fatigue, but also contributes to better precision and control when making cuts. The comfortable grip design further complements this feature, ensuring a secure hold even in challenging conditions.

Another notable characteristic of the Echo ECS-2000 is its adjustable automatic oiler. This innovative system allows users to customize the oil delivery based on the material being cut, optimizing chain lubrication and extending the life of the chain. This ensures optimal performance during operation and reduces the frequency of maintenance, making the ECS-2000 a low-maintenance option.

The chainsaw is equipped with a lightweight yet durable chassis, constructed from high-quality materials that are designed to withstand rigorous use in various environments. This durability is complemented by a chain brake system for added safety, providing instant stopping power if kickback occurs.

The ECS-2000 also features a tool-less air filter cover, allowing for quick and easy access for maintenance and cleaning. This user-friendly design ensures that operators can keep their equipment in top condition with minimal effort.

In summary, the Echo ECS-2000 is a powerful and efficient chainsaw that balances performance with user comfort and safety. Its advanced engine technology, ergonomic design, customizable oiling system, and overall durability make it an excellent choice for anyone looking to tackle demanding cutting tasks with ease. Whether for professional use or home garden projects, this chainsaw delivers the reliability and efficiency that users expect from Echo.
Top Page Image Contents