Echo PE-225 specifications Assembly, Drive Shaft/Power Head, Throttle Linkage and Ignition Leads

Page 13

PE-225

ASSEMBLY

ASSEMBLY

Drive Shaft/Power Head

Parts Required:

Power Head, Drive Shaft Assembly

1.Stand engine on a level surface.

2.Remove vinyl cap from drive shaft.

3.Loosen the two bolts (A) at drive shaft end of engine.

4.Carefully fit drive shaft assembly to engine, making sure that inner drive shaft engages into clutch mount.

Note: Rotate the drive shaft housing until edger housing is in line with the engine.

5. Tighten bolts (A).

IA

Throttle Linkage and Ignition Leads

1.Close choke and remove air filter cover.

2.Place throttle linkage (A) into adjustment fixture (B) and install wire end into large carburetor throttle swivel hole (C). Check throttle for freedom of movement and that wide open throttle / low idle extremes are adjusted properly. The throttle linkage must be adjusted by moving the adjustment nut (D). Consult with your Echo Dealer for correct adjustment procedure.

3.Tighten nut (E).

4.Connect 2 ignition stop leads (F, G) from throttle cable tubing to 2 ignition leads (F, G) on engine.

D A C

E

B

F

H

G

X7722272308

13

© 2/2014 ECHO Inc.

Image 13
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information On / OFF International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Drive Shaft/Power Head AssemblyThrottle Linkage and Ignition Leads Front Handle AssemblyFuel OperationFuel Requirements Handling FuelAfter use Purge Bulb Starting Cold EngineStopping Engine Starting Warm EngineOperation Techniques Maintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemExhaust Port Cleaning Carburetor AdjustmentEngine Break-In High Altitude OperationLubrication Gear HousingDrive Shaft Blade Replacement Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements PE-225 PE-225 PE-225 PE-225 ECHO, Incorporated
Related manuals
Manual 32 pages 3.76 Kb

PE-225 specifications

The Echo PE-225 is a powerful and versatile gas-powered brush cutter designed for both residential and commercial landscaping tasks. Engineered for efficiency and ease of use, this tool combines advanced technology with reliable performance, making it ideal for tackling tough vegetation in yards and gardens.

One of the standout features of the Echo PE-225 is its robust 21.2cc two-stroke engine. This engine is designed to deliver impressive power while maintaining a lightweight design, allowing users to handle the tool with minimal fatigue. The engine employs a unique intercooler system that helps to maintain optimal temperature, ensuring consistent performance even during extended use.

The ergonomics of the Echo PE-225 are noteworthy, featuring a comfortable handle layout that reduces strain on the user's wrists and arms. The adjustable handlebar provides extra comfort by allowing users to customize their grip and hand positioning based on their personal preference. This design element enhances the overall user experience, especially during longer jobs that require a considerable amount of time on the tool.

This brush cutter utilizes a dual-line cutting system, which boasts a robust 0.095-inch line that cuts through thick grass and weeds effortlessly. The easy-to-load spool ensures that users can quickly replace the cutting line without wasting time or effort. Additionally, the PE-225 features a semi-automatic line feed system that advances the line as needed during operation, minimizing interruptions and maximizing efficiency.

For durability and longevity, the Echo PE-225 is constructed with high-quality materials, including a heavy-duty gear case that can withstand rigorous use and harsh conditions. The solid build reduces the likelihood of breakdowns and repairs, making it a cost-effective alternative for both homeowners and landscaping professionals.

The PE-225 also offers versatility, with interchangeable attachments that can turn the brush cutter into a multi-tasking landscaping tool. This adaptability makes it suitable for various tasks, including trimming, edging, and cutting thicker brush.

In summary, the Echo PE-225 is an excellent choice for anyone in need of a reliable and efficient brush cutting solution. Its powerful engine, ergonomic design, dual-line cutting system, and durable construction make it a standout option for tackling any landscaping challenge. With the Echo PE-225, users can achieve professional-level results with ease and comfort.