Echo PE-225 specifications Operation Techniques

Page 19

PE-225

OPERATION

 

 

Operation Techniques

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.

1.Before edging, water the area to soften the ground to make edging easier.

2.Before edging, check the area and remove all obstacles and objects that could be thrown.

3.Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass.

Note: Blade depth may have to be adjusted due to differences in height between the hard surface and the top of the grass.

Never adjust blade height with engine running, otherwise serious personal injury may result.

4.Loosen adjustment knob and adjust the blade's depth of cut to produce a fine cut between sidewalk and grass using a minimum blade depth, usually with about 13 mm (1/2 in.) of the blade into the ground. Tighten adjustment knob.

5.Before edging, plan your direction of travel so that the unit will always be positioned on your right side and so that you walk on a hard surface whenever possible.

6.Hold edger as shown.

Before edging, be sure to read and understand the entire

Operator's Manual to avoid serious injury.

7.When starting to edge, run the engine at full throttle, and lower the blade gently into the ground, being careful not to hit the concrete with the blade.

8.Don't force the blade. Move only as quickly as the blade will allow.

The complete unit, specifically the drive shaft assembly and muffler exhaust area may become very hot during use. Avoid contact during and immediately after operation, otherwise serious personal injury may result.

X7722272308

19

© 2/2014 ECHO Inc.

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Burn Hazard Operator’s ManualTable of Contents Servicing Information IntroductionAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information On / OFF International SymbolsPersonal Condition and Safety Equipment Repetitive Stress Injuries Vibration and ColdEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Drive Shaft/Power Head AssemblyThrottle Linkage and Ignition Leads Front Handle AssemblyHandling Fuel OperationFuel Fuel RequirementsAfter use Purge Bulb Starting Cold EngineStopping Engine Starting Warm EngineOperation Techniques Maintenance Intervals MaintenanceSkill Levels Fuel Filter Air FilterCooling System Spark PlugSpark Arrestor Screen Exhaust SystemHigh Altitude Operation Carburetor AdjustmentExhaust Port Cleaning Engine Break-InLubrication Gear HousingDrive Shaft Blade Replacement Engine Problem Troubleshooting Chart TroubleshootingLong Term Storage Over 30 Days StorageModel SpecificationsOWNER’S Responsibility Warranty StatementsWarranty Statements PE-225 PE-225 PE-225 PE-225 ECHO, Incorporated
Related manuals
Manual 32 pages 3.76 Kb

PE-225 specifications

The Echo PE-225 is a powerful and versatile gas-powered brush cutter designed for both residential and commercial landscaping tasks. Engineered for efficiency and ease of use, this tool combines advanced technology with reliable performance, making it ideal for tackling tough vegetation in yards and gardens.

One of the standout features of the Echo PE-225 is its robust 21.2cc two-stroke engine. This engine is designed to deliver impressive power while maintaining a lightweight design, allowing users to handle the tool with minimal fatigue. The engine employs a unique intercooler system that helps to maintain optimal temperature, ensuring consistent performance even during extended use.

The ergonomics of the Echo PE-225 are noteworthy, featuring a comfortable handle layout that reduces strain on the user's wrists and arms. The adjustable handlebar provides extra comfort by allowing users to customize their grip and hand positioning based on their personal preference. This design element enhances the overall user experience, especially during longer jobs that require a considerable amount of time on the tool.

This brush cutter utilizes a dual-line cutting system, which boasts a robust 0.095-inch line that cuts through thick grass and weeds effortlessly. The easy-to-load spool ensures that users can quickly replace the cutting line without wasting time or effort. Additionally, the PE-225 features a semi-automatic line feed system that advances the line as needed during operation, minimizing interruptions and maximizing efficiency.

For durability and longevity, the Echo PE-225 is constructed with high-quality materials, including a heavy-duty gear case that can withstand rigorous use and harsh conditions. The solid build reduces the likelihood of breakdowns and repairs, making it a cost-effective alternative for both homeowners and landscaping professionals.

The PE-225 also offers versatility, with interchangeable attachments that can turn the brush cutter into a multi-tasking landscaping tool. This adaptability makes it suitable for various tasks, including trimming, edging, and cutting thicker brush.

In summary, the Echo PE-225 is an excellent choice for anyone in need of a reliable and efficient brush cutting solution. Its powerful engine, ergonomic design, dual-line cutting system, and durable construction make it a standout option for tackling any landscaping challenge. With the Echo PE-225, users can achieve professional-level results with ease and comfort.
Top Page Image Contents