Echo PE-225 specifications Carburetor Adjustment, Exhaust Port Cleaning, Engine Break-In

Page 24

MAINTENANCE

PE-225

 

 

Exhaust Port Cleaning

Level 2.

Parts Required: As needed: Heat Shield

1.Remove spark plug lead from spark plug, and remove engine cover.

2.Place piston at top dead center. Remove muffler (A) and heat shield (B).

3.Use a wood or plastic scraping tool to clean deposits from cylinder exhaust port.

BA

Never use a metal tool to scrape carbon from the exhaust port. Do not scratch the cylinder or piston when cleaning the exhaust port. Do not allow carbon particles to enter the cylinder.

4.Inspect heat shield, and replace if damaged.

5.Install heat shield and muffler.

6.Tighten muffler mounting bolts (or nuts) to 80-95 in•lbf (90-110 kgf•cm).

7.Install engine cover and attach spark plug lead.

8.Start engine, and warm to operating temperature.

9.Stop engine, and re-tighten mounting bolts (or nuts) to specifications.

Carburetor Adjustment

Level 2.

Engine Break-In

New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissions will stabilize. Idle speed can be adjusted as required.

High Altitude Operation

This engine has been factory adjusted to maintain satisfactory starting, emission, and durability performance up to 1,100 feet above sea level (ASL) (96.0 kPa). To maintain proper engine operation and emission compliance above 1,100 feet ASL the carburetor may need to be adjusted by an authorized ECHO service dealer.

If the engine is adjusted for operation above 1,100 feet ASL, the carburetor must be re-adjusted when operating the engine below 1,100 feet ASL, otherwise severe engine damage may result.

Parts None

Required:

24

X7722272308

© 2/2014 ECHO Inc.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationSafety Additional or Replacement ManualsManual Safety Symbols and Important Information International Symbols On / OFFPersonal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment Emission Control Exhaust & Evaporative EPA 2010 and Later and/or C.A.R.B. TierProduct Emission Durability Emission Compliance Period Description Description Contents Assembly Drive Shaft/Power HeadThrottle Linkage and Ignition Leads Assembly Front HandleOperation FuelFuel Requirements Handling FuelAfter use Starting Cold Engine Purge BulbStarting Warm Engine Stopping EngineOperation Techniques Maintenance Maintenance IntervalsSkill Levels Air Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenCarburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationGear Housing LubricationDrive Shaft Blade Replacement Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements PE-225 PE-225 PE-225 PE-225 ECHO, Incorporated
Related manuals
Manual 32 pages 3.76 Kb

PE-225 specifications

The Echo PE-225 is a powerful and versatile gas-powered brush cutter designed for both residential and commercial landscaping tasks. Engineered for efficiency and ease of use, this tool combines advanced technology with reliable performance, making it ideal for tackling tough vegetation in yards and gardens.

One of the standout features of the Echo PE-225 is its robust 21.2cc two-stroke engine. This engine is designed to deliver impressive power while maintaining a lightweight design, allowing users to handle the tool with minimal fatigue. The engine employs a unique intercooler system that helps to maintain optimal temperature, ensuring consistent performance even during extended use.

The ergonomics of the Echo PE-225 are noteworthy, featuring a comfortable handle layout that reduces strain on the user's wrists and arms. The adjustable handlebar provides extra comfort by allowing users to customize their grip and hand positioning based on their personal preference. This design element enhances the overall user experience, especially during longer jobs that require a considerable amount of time on the tool.

This brush cutter utilizes a dual-line cutting system, which boasts a robust 0.095-inch line that cuts through thick grass and weeds effortlessly. The easy-to-load spool ensures that users can quickly replace the cutting line without wasting time or effort. Additionally, the PE-225 features a semi-automatic line feed system that advances the line as needed during operation, minimizing interruptions and maximizing efficiency.

For durability and longevity, the Echo PE-225 is constructed with high-quality materials, including a heavy-duty gear case that can withstand rigorous use and harsh conditions. The solid build reduces the likelihood of breakdowns and repairs, making it a cost-effective alternative for both homeowners and landscaping professionals.

The PE-225 also offers versatility, with interchangeable attachments that can turn the brush cutter into a multi-tasking landscaping tool. This adaptability makes it suitable for various tasks, including trimming, edging, and cutting thicker brush.

In summary, the Echo PE-225 is an excellent choice for anyone in need of a reliable and efficient brush cutting solution. Its powerful engine, ergonomic design, dual-line cutting system, and durable construction make it a standout option for tackling any landscaping challenge. With the Echo PE-225, users can achieve professional-level results with ease and comfort.
Top Page Image Contents