Echo PE-225 specifications Long Term Storage Over 30 Days

Page 28

STORAGE

PE-225

 

 

STORAGE

During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may result.

Long Term Storage (Over 30 Days)

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following:

1. Store unit in a dry, dust free place, out of the reach of children.

Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.

2.Place the stop switch in the “OFF” position.

3.Remove accumulation of grease, oil, dirt and debris from exterior of unit.

4.Perform all periodic lubrication and services that are required.

5.Tighten all the screws and nuts.

6.Drain fuel tank completely. Press purge bulb 6-7 times to remove remaining fuel from carburetor then drain the tank again. Close choke, start and run the engine until it stops due to lack of fuel.

7.

a.Allow engine to cool then remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

b.Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.

c.Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there.

8.Install the spark plug (do not connect ignition cable).

28

X7722272308

© 2/2014 ECHO Inc.

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Operator’s Manual Burn HazardTable of Contents Introduction Servicing InformationAdditional or Replacement Manuals SafetyManual Safety Symbols and Important Information International Symbols On / OFFPersonal Condition and Safety Equipment Vibration and Cold Repetitive Stress InjuriesEquipment EPA 2010 and Later and/or C.A.R.B. Tier Emission Control Exhaust & EvaporativeProduct Emission Durability Emission Compliance Period Description Description Contents Drive Shaft/Power Head AssemblyThrottle Linkage and Ignition Leads Assembly Front HandleOperation FuelFuel Requirements Handling FuelAfter use Starting Cold Engine Purge BulbStarting Warm Engine Stopping EngineOperation Techniques Maintenance Intervals MaintenanceSkill Levels Air Filter Fuel FilterSpark Plug Cooling SystemExhaust System Spark Arrestor ScreenCarburetor Adjustment Exhaust Port CleaningEngine Break-In High Altitude OperationLubrication Gear HousingDrive Shaft Blade Replacement Troubleshooting Engine Problem Troubleshooting ChartStorage Long Term Storage Over 30 DaysSpecifications ModelWarranty Statements OWNER’S ResponsibilityWarranty Statements PE-225 PE-225 PE-225 PE-225 ECHO, Incorporated
Related manuals
Manual 32 pages 3.76 Kb

PE-225 specifications

The Echo PE-225 is a powerful and versatile gas-powered brush cutter designed for both residential and commercial landscaping tasks. Engineered for efficiency and ease of use, this tool combines advanced technology with reliable performance, making it ideal for tackling tough vegetation in yards and gardens.

One of the standout features of the Echo PE-225 is its robust 21.2cc two-stroke engine. This engine is designed to deliver impressive power while maintaining a lightweight design, allowing users to handle the tool with minimal fatigue. The engine employs a unique intercooler system that helps to maintain optimal temperature, ensuring consistent performance even during extended use.

The ergonomics of the Echo PE-225 are noteworthy, featuring a comfortable handle layout that reduces strain on the user's wrists and arms. The adjustable handlebar provides extra comfort by allowing users to customize their grip and hand positioning based on their personal preference. This design element enhances the overall user experience, especially during longer jobs that require a considerable amount of time on the tool.

This brush cutter utilizes a dual-line cutting system, which boasts a robust 0.095-inch line that cuts through thick grass and weeds effortlessly. The easy-to-load spool ensures that users can quickly replace the cutting line without wasting time or effort. Additionally, the PE-225 features a semi-automatic line feed system that advances the line as needed during operation, minimizing interruptions and maximizing efficiency.

For durability and longevity, the Echo PE-225 is constructed with high-quality materials, including a heavy-duty gear case that can withstand rigorous use and harsh conditions. The solid build reduces the likelihood of breakdowns and repairs, making it a cost-effective alternative for both homeowners and landscaping professionals.

The PE-225 also offers versatility, with interchangeable attachments that can turn the brush cutter into a multi-tasking landscaping tool. This adaptability makes it suitable for various tasks, including trimming, edging, and cutting thicker brush.

In summary, the Echo PE-225 is an excellent choice for anyone in need of a reliable and efficient brush cutting solution. Its powerful engine, ergonomic design, dual-line cutting system, and durable construction make it a standout option for tackling any landscaping challenge. With the Echo PE-225, users can achieve professional-level results with ease and comfort.
Top Page Image Contents