Dixon 115 338927R1, SZ4216 CA, 966505101 manual Personal Safety Equipment, Slope Operation

Page 11

SAFETY

Personal Safety Equipment

WARNING!

When using the machine, approved personal protective equipment (shown in illustrations) shall be used. Personal protective equipment cannot eliminate the risk of injury but it will reduce the degree of injury if an accident does happen. Ask your retailer for help in choosing the right equipment.

•Make sure that you have first aid equipment close at hand when using the machine.

•Never use the machine when barefoot.

•Always wear protective shoes or boots, preferably with steel toe caps.

•Always wear approved protective glasses or a full visor when assembling or driving.

•Always wear gloves when handling the blades.

•Never wear loose clothing that can get caught in moving parts.

•Use ear protectors to avoid damage to hearing.

Slope Operation

Slopes are a major factor related to loss of control and tip-over accidents, which can result in severe injury or death. Operation on all slopes requires extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

•Mow up and down slopes (10 degrees maximum), not across.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Choose a low ground speed so that you will not have to stop while on the slope.

•Do not mow on wet grass. Tires may lose traction.

•Avoid starting, stopping, or turning on a slope. If the tires lose traction, disengage the blades and proceed slowly straight down the slope.

•Keep movement on the slopes slow and gradual. Do not make sudden changes in speed or direction, which could cause machine to roll over.

•Use extra care while operating machine with grass catchers or other attachments; they can affect the stability of the machine.

•Do not use on steep slopes.

•Do not try to stabilize the machine by putting a foot on the ground.

•Do not mow near drop-offs, ditches, or embankments. The machine could suddenly roll over if a wheel is over the edge or if the edge caves in.

8011-670a

Personal protective equipment

6003-004

Mow up and down, not side to side

WARNING!

Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across any slopes.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Throttle Control Ignition SwitchParking Brake Refueling Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingManual Transport Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceEvery 50 hours Always use protective glasses when handling the battery BatteryTo clean battery and terminals Tire Pressures Safety SystemTo replace deck belt BeltsDeck Belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceWiring Diagram Standard Hardware Technical DataTorque Specifications Transmission SZ4216 CA EngineProductivity Overall dimensionsSZ4216 Equipment CE requirements USA requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service After the First 10 Hours Hour ServiceService Journal At Least Once Each Year Page 115 338927R1 01/27/10

115 338927R1, 966505101, SZ4216 CA specifications

The Dixon 966505101, also known as SZ4216 CA,115 338927R1, is a high-performance piece of machinery designed to meet the rigorous demands of various industrial applications. This unit shines in sectors where efficiency, reliability, and precision are paramount, including automotive, aerospace, and heavy manufacturing.

One of the main features of the Dixon 966505101 is its advanced engineering design, which incorporates cutting-edge technology to enhance operational efficiency. The unit is constructed using high-grade materials that ensure durability and longevity under heavy use. This construction also allows for a degree of resistance against wear and tear, making it suitable for environments that exude harsh conditions.

The Dixon 966505101 employs innovative technologies that facilitate superior performance. One standout technology is its integrated sensing system that monitors operational parameters in real-time, providing critical data that can be utilized for predictive maintenance. This system not only extends the lifespan of the equipment but also minimizes downtime, reducing overall operational costs.

Another notable characteristic is its user-friendly interface. The control panel is designed to allow operators to easily navigate through different settings and monitor system performance. This enhances the overall user experience and promotes efficiency in settings where time is of the essence.

The machinery also features modular components, which allows for easy upgrades and maintenance. This means that as technology advances, the Dixon 966505101 can be adapted to incorporate new enhancements, ensuring sustained productivity and relevance in a rapidly evolving market.

In addition, the Dixon 966505101 focuses on energy efficiency. It incorporates advanced energy-saving technologies that reduce power consumption without compromising performance. This aspect not only contributes to lower operating costs but also aligns with the growing emphasis on sustainability within industrial applications.

In summary, the Dixon 966505101, with its main features, advanced technologies, and durable characteristics, is a versatile and reliable choice for a variety of industrial settings. Its design emphasizes efficiency and ease of use, making it an invaluable asset for companies looking to boost productivity while minimizing operational costs.
Top Page Image Contents