Dixon SZ4216 CA, 966505101, 115 338927R1 manual Safety System, Tire Pressures

Page 36

MAINTENANCE

Safety System

The machine is equipped with a safety system that prevents starting or driving under the following conditions.

The engine can only be started when:

1.The mower deck is disengaged.

2.The steering controls are in the outer, locked neutral position.

3.The driver is sitting in the driver’s seat.

4.The parking brake is on.

Make daily inspections to ensure that the safety system works by attempting to start the engine when one of the conditions is not met. Change the conditions and try again.

If the machine starts when one of these conditions is not met, turn the machine off and repair the safety system before using the machine again.

Make sure the engine stops when the park brake is not engaged and the operator leaves the seated position.

Check that the engine stops if the mower blades are engaged and the driver temporarily moves off the drivers seat.

8050-020

Start conditions

IMPORTANT INFORMATION

In order to be able to drive, the driver must sit in the seat and release the parking brake before the steering controls can be moved into the neutral position, otherwise the engine will stop.

Tire Pressures

All tires should be at 15 psi / 103 kPa / 1 bar.

8011-564

Tire pressures

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Choke Control RefuelingFuel Shut Off Valve Mower Deck Lifting LeverTracking Always use the high position F to transportBlade Control Lever Manual TransportTraining SteeringBefore Starting Starting the EnginePlace controls in neutral position Open the fuel valve Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleEvery 50 hours Battery To clean battery and terminalsAlways use protective glasses when handling the battery Safety System Tire PressuresBelts Deck BeltTo replace deck belt EZT Belt Cutting BladesAdjusting the Mower Deck Leveling DeckCleaning Removal and installation of caster wheelUse protective glasses when cleaning and washing Caster WheelsLubrication GeneralFront Wheel Mount Front Wheel BearingsEngine Lubrication Steering Control ShaftsTroubleshooting Problem CauseTroubleshooting Service Winter StorageWiring Diagram Technical Data Torque SpecificationsStandard Hardware SZ4216 CA Engine TransmissionOverall dimensions SZ4216 EquipmentProductivity USA requirements CE requirementsService Journal Delivery ServiceAction Date, mtr reading, stamp, sign Hour Service After the First 10 HoursService Journal At Least Once Each Year Page 115 338927R1 01/27/10

115 338927R1, 966505101, SZ4216 CA specifications

The Dixon 966505101, also known as SZ4216 CA,115 338927R1, is a high-performance piece of machinery designed to meet the rigorous demands of various industrial applications. This unit shines in sectors where efficiency, reliability, and precision are paramount, including automotive, aerospace, and heavy manufacturing.

One of the main features of the Dixon 966505101 is its advanced engineering design, which incorporates cutting-edge technology to enhance operational efficiency. The unit is constructed using high-grade materials that ensure durability and longevity under heavy use. This construction also allows for a degree of resistance against wear and tear, making it suitable for environments that exude harsh conditions.

The Dixon 966505101 employs innovative technologies that facilitate superior performance. One standout technology is its integrated sensing system that monitors operational parameters in real-time, providing critical data that can be utilized for predictive maintenance. This system not only extends the lifespan of the equipment but also minimizes downtime, reducing overall operational costs.

Another notable characteristic is its user-friendly interface. The control panel is designed to allow operators to easily navigate through different settings and monitor system performance. This enhances the overall user experience and promotes efficiency in settings where time is of the essence.

The machinery also features modular components, which allows for easy upgrades and maintenance. This means that as technology advances, the Dixon 966505101 can be adapted to incorporate new enhancements, ensuring sustained productivity and relevance in a rapidly evolving market.

In addition, the Dixon 966505101 focuses on energy efficiency. It incorporates advanced energy-saving technologies that reduce power consumption without compromising performance. This aspect not only contributes to lower operating costs but also aligns with the growing emphasis on sustainability within industrial applications.

In summary, the Dixon 966505101, with its main features, advanced technologies, and durable characteristics, is a versatile and reliable choice for a variety of industrial settings. Its design emphasizes efficiency and ease of use, making it an invaluable asset for companies looking to boost productivity while minimizing operational costs.
Top Page Image Contents