Dixon 115 338927R1, SZ4216 CA, 966505101 manual EZT Belt, Cutting Blades

Page 38

MAINTENANCE

EZT Belt

To replace EZT belt

Park the mower on a level surface. Engage the park brake.

EZT belt removal

NOTE: Be careful not to damage the fan blades on the EZT as this can affect cooling or damage the EZT.

1.Remove the deck belt (see To Replace Deck Belt in this section of the manual).

2.Create slack in the belt by pushing the spring loaded idler arm inward. Rotate arm to release belt tension.

3.The belt should now be able to be removed from the engine pulley and EZT pulleys.

Belt installation

1.Wrap the EZT belt around the EZT pulleys.

2.Route the belt around the inside of the idler pulley.

3.Wrap the belt around the engine pulley.

WARNING!

The engine and the exhaust system, become very hot during operation. Risk for burns if touched. Allow engine and exhaust system to cool at least two (2) minutes.

Cutting Blades

In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.

Bent or cracked blades or blades with large nicks should be replaced.

Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ ground or must be replaced.

Balance the blades after sharpening. Check the blade mounts.

Blade replacement

1.Remove blade bolt by turning counterclockwise.

2.Install new or resharpened blade with stamped “GRASS SIDE” facing towards ground/grass (down) or “THIS SIDE UP” facing deck and cutter housing.

3.Install and tighten blade bolt securely.

4.Torque blade bolt to 45-55 ft/lbs (60-75 Nm).

IMPORTANT INFORMATION

Special blade bolt is heat treated. Replace with a Dixon bolt if required.

Do not use lower grade hardware than specified.

WARNING!

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

The sharpening of blades should be carried out by an authorized service workshop.

1

2

 

3

 

8052-007

1.Blade

2.Cutter housing

3.Blade bolt (special)

Blade attachment

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Remove key before General Operation SafetySafety Instructions Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Spark ArrestorControls Control LocationsSteering Control Levers Throttle Control Ignition SwitchParking Brake Choke Control RefuelingTracking Fuel Shut Off ValveMower Deck Lifting Lever Always use the high position F to transportBlade Control Lever Manual TransportTraining SteeringBefore Starting Starting the EnginePlace controls in neutral position Open the fuel valve Jumper cables To remove cables, reverse orderRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Maintenance ScheduleEvery 50 hours Always use protective glasses when handling the battery BatteryTo clean battery and terminals Safety System Tire PressuresTo replace deck belt BeltsDeck Belt EZT Belt Cutting BladesAdjusting the Mower Deck Leveling DeckUse protective glasses when cleaning and washing CleaningRemoval and installation of caster wheel Caster WheelsLubrication GeneralEngine Lubrication Front Wheel MountFront Wheel Bearings Steering Control ShaftsTroubleshooting Problem CauseTroubleshooting Service Winter StorageWiring Diagram Standard Hardware Technical DataTorque Specifications SZ4216 CA Engine TransmissionProductivity Overall dimensionsSZ4216 Equipment USA requirements CE requirementsAction Date, mtr reading, stamp, sign Service JournalDelivery Service Hour Service After the First 10 HoursService Journal At Least Once Each Year Page 115 338927R1 01/27/10

115 338927R1, 966505101, SZ4216 CA specifications

The Dixon 966505101, also known as SZ4216 CA,115 338927R1, is a high-performance piece of machinery designed to meet the rigorous demands of various industrial applications. This unit shines in sectors where efficiency, reliability, and precision are paramount, including automotive, aerospace, and heavy manufacturing.

One of the main features of the Dixon 966505101 is its advanced engineering design, which incorporates cutting-edge technology to enhance operational efficiency. The unit is constructed using high-grade materials that ensure durability and longevity under heavy use. This construction also allows for a degree of resistance against wear and tear, making it suitable for environments that exude harsh conditions.

The Dixon 966505101 employs innovative technologies that facilitate superior performance. One standout technology is its integrated sensing system that monitors operational parameters in real-time, providing critical data that can be utilized for predictive maintenance. This system not only extends the lifespan of the equipment but also minimizes downtime, reducing overall operational costs.

Another notable characteristic is its user-friendly interface. The control panel is designed to allow operators to easily navigate through different settings and monitor system performance. This enhances the overall user experience and promotes efficiency in settings where time is of the essence.

The machinery also features modular components, which allows for easy upgrades and maintenance. This means that as technology advances, the Dixon 966505101 can be adapted to incorporate new enhancements, ensuring sustained productivity and relevance in a rapidly evolving market.

In addition, the Dixon 966505101 focuses on energy efficiency. It incorporates advanced energy-saving technologies that reduce power consumption without compromising performance. This aspect not only contributes to lower operating costs but also aligns with the growing emphasis on sustainability within industrial applications.

In summary, the Dixon 966505101, with its main features, advanced technologies, and durable characteristics, is a versatile and reliable choice for a variety of industrial settings. Its design emphasizes efficiency and ease of use, making it an invaluable asset for companies looking to boost productivity while minimizing operational costs.
Top Page Image Contents