Dixon SZ4216 CA, 966505101, 115 338927R1 manual Jumper cables, To remove cables, reverse order

Page 27

operation

Slowly slide the choke control back to the middle position when the engine has started.

Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it to heavily. USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects, or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

WARNING!

Lead-acid batteries generate explosive gases. Keep sparks, flame and smoking materials away from batteries. Always wear eye protection when around batteries.

If your battery is too weak to start the engine, it should be recharged. (See Battery in the Maintenance section.)

If jumper cables are used for emergency starting, follow this procedure:

Jumper cables

1.Connect each end of the RED cable to the POSITIVE (+) terminal on each battery, taking care not to short against chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal of the fully charged battery.

3.Connect the other end of the BLACK cable to a good CHASSIS GROUND on the mower with the discharged battery, away from the fuel tank and battery.

To remove cables, reverse order

1.Remove BLACK cable first from chassis and then from the fully charged battery.

2.Remove RED cable last from both batteries.

8050-007

Use full throttle when mowing

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt negative grounded system. The other vehicle must also be a 12-volt negative grounded system. Do not use your mower to start other vehicles.

8011-642

Jumper cable connection

27

Image 27
Contents Operator Manual Page Contents Page Introduction Manufacturing Number Good ServiceSymbols and decals Remove key before Safety Safety InstructionsGeneral Operation Never take passengers Slope Operation Personal Safety EquipmentChildren Safe Handling of Gasoline General Maintenance Risk of sparking Spark Arrestor TransportControl Locations ControlsSteering Control Levers Ignition Switch Parking BrakeThrottle Control Refueling Choke ControlAlways use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever TrackingManual Transport Blade Control LeverSteering TrainingStarting the Engine Before StartingPlace controls in neutral position Open the fuel valve To remove cables, reverse order Jumper cablesRunning Operating on Hills Mowing Tips Stopping the Engine Manual Transport Maintenance Schedule MaintenanceEvery 50 hours Battery To clean battery and terminalsAlways use protective glasses when handling the battery Tire Pressures Safety SystemBelts Deck BeltTo replace deck belt Cutting Blades EZT BeltLeveling Deck Adjusting the Mower DeckCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LubricationSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationProblem Cause TroubleshootingTroubleshooting Winter Storage ServiceWiring Diagram Technical Data Torque SpecificationsStandard Hardware Transmission SZ4216 CA EngineOverall dimensions SZ4216 EquipmentProductivity CE requirements USA requirementsService Journal Delivery ServiceAction Date, mtr reading, stamp, sign After the First 10 Hours Hour ServiceService Journal At Least Once Each Year Page 115 338927R1 01/27/10

115 338927R1, 966505101, SZ4216 CA specifications

The Dixon 966505101, also known as SZ4216 CA,115 338927R1, is a high-performance piece of machinery designed to meet the rigorous demands of various industrial applications. This unit shines in sectors where efficiency, reliability, and precision are paramount, including automotive, aerospace, and heavy manufacturing.

One of the main features of the Dixon 966505101 is its advanced engineering design, which incorporates cutting-edge technology to enhance operational efficiency. The unit is constructed using high-grade materials that ensure durability and longevity under heavy use. This construction also allows for a degree of resistance against wear and tear, making it suitable for environments that exude harsh conditions.

The Dixon 966505101 employs innovative technologies that facilitate superior performance. One standout technology is its integrated sensing system that monitors operational parameters in real-time, providing critical data that can be utilized for predictive maintenance. This system not only extends the lifespan of the equipment but also minimizes downtime, reducing overall operational costs.

Another notable characteristic is its user-friendly interface. The control panel is designed to allow operators to easily navigate through different settings and monitor system performance. This enhances the overall user experience and promotes efficiency in settings where time is of the essence.

The machinery also features modular components, which allows for easy upgrades and maintenance. This means that as technology advances, the Dixon 966505101 can be adapted to incorporate new enhancements, ensuring sustained productivity and relevance in a rapidly evolving market.

In addition, the Dixon 966505101 focuses on energy efficiency. It incorporates advanced energy-saving technologies that reduce power consumption without compromising performance. This aspect not only contributes to lower operating costs but also aligns with the growing emphasis on sustainability within industrial applications.

In summary, the Dixon 966505101, with its main features, advanced technologies, and durable characteristics, is a versatile and reliable choice for a variety of industrial settings. Its design emphasizes efficiency and ease of use, making it an invaluable asset for companies looking to boost productivity while minimizing operational costs.