Dixon ZTR 5020, ZTR 5424 To GO Forward, To GO Backward, Turning, Braking, Choke Control Lever

Page 16

CONTROLS

TO GO FORWARD:

From neutral position, gently push both drive levers forward.

To increase speed, move levers farther forward.

TO GO BACKWARD:

From neutral position, gently pull both drive levers toward you.

TURNING:

Turning is controlled by moving one drive lever slightly forward or rearward of the other.

To turn left, move left lever rearward of the right lever.

To turn "square corners" move lever of desired direction to neutral.

To turn on mower's own axis (zero turning radius) stop and move one lever to reverse position and the other to forward position.

BRAKING:

To brake mower, move both levers in direction opposite of travel, release levers to neutral, set parking brake. Park only on level surfaces.

CHOKE CONTROL LEVER:

Located on control panel to operator's right.

Used to start a cold engine.

THROTTLE CONTROL LEVER:

Located on control panel to operator's right.

Controls engine speed, slow to maximum.

While mowing, throttle control should be set to the MAXIMUM or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed.

Page 14

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Important Read Carefully Index Most common causes of injury to the operator or bystander Safety Symbols Safety Alert SymbolSerious injury or death Slope Operation Do notBe alert to avoid accidents Service Dixon Limited Warranty Policy -- Estate Models Specifications Model ZTRRear 20 X 1 0.5 X 8 Multi Trac Seat Adjustment Instructions Page Controls Parking BrakeTo SET Parking Brake HYDRO-GEAR Drive SystemTo GO Forward To GO BackwardTurning BrakingCircuit Breaker Blade DriveMower Deck CUT Height Lift Lever Operation Instructions Before Operating MowerBlade Drive Switch Test Starting Instructions Cold Engine Always turn engine off when leaving mower Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsDeckrollers Care and Maintenance Maintenance ScheduleCutter Blade Maintenance Belt Tension Fuel Shut OFF Valve LubricationSeries Rear Wheels Changing the Engine OIL Protect Your InvestmentMower Deck Installation Care and Maintenance Mower Deck Leveling Procedure BOX to Hydrostat Belt Adjustment Parking Brake Cable Adjustment Neutraladjustment Care and Maintenance Procedure for Electric Clutch Adjustment Ohms TestHydrostatic Transmission OIL and Filter Service OIL Filter P/N 5565 ImportantWheels and Tires Standard Service Parts List Estate Model 42 DeckBriggs and Stratton AIR and OIL Filter Part Numbers Mower CUT Quality TroubleshootingSituation Causes Remedy Side or the other Drive System Situation Causes RemedyElectrical System Owner Information Purchased from

ZTR 5424, ZTR 5020 specifications

The Dixon ZTR 5424 and ZTR 5020 are prominent models in the world of zero-turn mowers, known for their reliability, cutting efficiency, and user-friendly features. These mowers are designed for both residential and commercial use, providing exceptional maneuverability and performance.

The Dixon ZTR 5424 is equipped with a powerful 24-horsepower engine, offering robust performance and ample power for cutting through tough grass and uneven terrain. With its wide 54-inch cutting deck, this model allows for efficient mowing over large areas, minimizing the time required to complete yard work. The deck is crafted with heavy-duty materials to ensure durability, while the adjustable cutting height makes it versatile for different grass types and seasons.

On the other hand, the ZTR 5020 features a slightly smaller engine, typically around 20 horsepower, making it ideal for residential users with medium-sized yards. The 50-inch cutting deck strikes a balance between capability and maneuverability, allowing users to navigate tight corners and landscaping features with ease. Both models utilize a dual-blade design, which enhances cutting efficiency and improves grass discharge, ensuring a well-manicured lawn.

One of the standout technologies found in both models is the hydrostatic transmission, providing smooth acceleration and seamless speed adjustments. This technology allows operators to control the mower with precision while eliminating the need for shifting gears, making mowing more enjoyable. Additionally, the zero-turn design allows for the impressive turning radius, enabling users to make sharp turns around obstacles without leaving uncut patches.

User comfort is also a priority in the design of both mowers. Equipped with ergonomic seats that reduce fatigue during extended use, the ZTR 5424 and ZTR 5020 ensure a comfortable riding experience. Easy-to-reach controls, including adjustable steering levers and intuitive dashboard features, enhance operational ease.

In summary, both the Dixon ZTR 5424 and ZTR 5020 provide powerful performance, efficient cutting capabilities, and user-friendly features. Whether for commercial or residential use, these mowers are well-suited to meet the demands of various mowing environments. With their combination of technology, comfort, and durability, the Dixon ZTR series continues to be a popular choice among lawn care professionals and homeowners alike.
Top Page Image Contents