Dixon ZTR 34, ZTR 44, ZTR 34 manual Blade Drive, Circuit Breaker

Page 22

CONTROLS

BLADE DRIVE

•Located on the control panel, on operator’s right.

•To engage the mower blade, pull up on the switch.

•To disengage mower blade, push down.

CIRCUIT BREAKER

•Located on the control panel to the operator’s right.

•Protection of the electrical system is by (1) 15 amp circuit breaker.

•If circuit breaker trips, push button to reset.

•If this condition repeats, consult dealer for inspection and repair.

—Fig. 6—

CHOKE AND THROTTLE CONTROL LEVER

•Located on control panel to operator’s right.

•Throttle control for engine speed.

•Choke for engine starting.

•Throttle control should be set to MAXIMUM or wide open setting to insure adequate cooling of the engine and to maintain mower deck blade speed while mowing.

Choke Position

Maximum

Throttle

Setting

—Fig. 7—

22

Image 22

Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notFire Hazards Fire Hazards CHILDREN, Bystanders and Pets Service Black Bear, Kodiak, Grizzly & SilverTip Mowers Specifications Specifications Black Bear 44 Model Seat Adjustment Instructions Controls Control LeversPark Brake To SET Park BrakeMower Deck CUT Height Lift Lever Blade Drive Circuit BreakerOperation Instructions Before Operating MowerStarting Instructions Testing of Safety Interlock Systems Park Brake Switch TestBlade Drive Switch Test Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height and Cutting Suggestions Towing Trailers Other Attachments To Free Wheel Machine Unlock TransmissionCare and Maintenance Maintenance ScheduleCutter Blade Maintenance OFF Season Battery Storage BatteryEngine Belts Belt TensionTires LubricationChanging the Engine OIL OIL FillHydrostatic Transmission OIL and Filter Service Service IntervalsHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Procedure Mower Deck LevelingMower Deck Removal PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsTroubleshooting Engine Starts but Cuts OUTSkips in spots Check for loose belt/slow ground speed Blades and Belts Standard Service Parts ListEngine AIR and OIL Filters OWNER’S Information Date Engine TunedPage Dixon and ZTR Are registered trademarks