Dixon ZTR 34, ZTR 44, ZTR 34 manual Controls, Control Levers

Page 19

CONTROLS

CONTROL LEVERS

For access to the seat, move control levers to neutral position and swing them outward.

NEUTRAL	SLOW	FAST	90o	SLOW
	FORWARD	FORWARD	RIGHT	REVERSE
—Fig. 2—				TURN
—Fig. 2—			Left Turn Opposite

TO GO FORWARD

•From neutral position, gently push control levers forward.

•To increase speed, move levers further forward.

TO GO BACKWARDS

•From neutral position, gently pull control levers toward you.

TURNING

•Turning is controlled by moving one control lever slightly forward or rearward of the other.

•To turn left, move left lever rearward of the right lever.

•To turn right, move right lever rearward of the left lever.

•To turn on mower’s own axis (zero turning radius), stop and move one lever to reverse position and the other to forward position.

BRAKING

•To brake mower, move both levers in direction opposite of travel.

NOTE: The pressure required to operate the mower is very light.

19

Image 19

Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation Slope Operation Do not Slope OperationFire Hazards Fire Hazards CHILDREN, Bystanders and Pets Service Black Bear, Kodiak, Grizzly & SilverTip Mowers Specifications Specifications Black Bear 44 Model Seat Adjustment Instructions Control Levers ControlsTo SET Park Brake Park BrakeMower Deck CUT Height Lift Lever Circuit Breaker Blade DriveBefore Operating Mower Operation InstructionsStarting Instructions Park Brake Switch Test Testing of Safety Interlock SystemsBlade Drive Switch Test Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Grass Catcher Attachment Mowing with aSide Discharge of the Clippings Grass Height and Cutting Suggestions To Free Wheel Machine Unlock Transmission Towing Trailers Other AttachmentsMaintenance Schedule Care and MaintenanceCutter Blade Maintenance OFF Season Battery Storage BatteryEngine Belt Tension BeltsLubrication TiresOIL Fill Changing the Engine OILService Intervals Hydrostatic Transmission OIL and Filter ServiceHydrostat OIL Maintenance Procedure Neutral Adjustment Mower Deck Leveling Procedure Mower Deck Leveling ProcedureMower Deck Removal Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine Starts but Cuts OUT TroubleshootingSkips in spots Check for loose belt/slow ground speed Blades and Belts Standard Service Parts ListEngine AIR and OIL Filters Date Engine Tuned OWNER’S InformationPage Dixon and ZTR Are registered trademarks