Dixon ZTR 44/968999538 manual Changing the Engine OIL, OIL Fill

Page 38

CARE AND MAINTENANCE

!

CAUTION HOT oil may cause burns. Allow engine to

cool before draining oil.

CHANGING THE ENGINE OIL

1.The “Dapco” oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve hose.

3.To drain, turn hex head valve stem counter-clockwise with a 10mm wrench or socket. (See

Fig. 9) Open to full open (approximately 7 turns).

Hex Head Valve Stem

—Fig. 9—

4.After engine is drained, tighten hex stem.

5.Change oil filter.

6.Fill with oil (see steps below).

NOTE: Refer to engine manufacturer’s recommendations for frequency of oil changes.

OIL FILL

1.Clean any spilled oil from engine and chassis.

2.Make sure the hex stem on drain valve has been tightened.

3.Refill engine with type and quantity of oil recommended by the engine manufacturer in engine literature.

NOTE: Engine oil changes on the SpeedZTR™ will require replacement of the oil filter. These filters may be available from your authorized Dixon dealer.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Safety Instructions Operator’s Manual Important Read Carefully Table of Contents Safety Safety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notFire Hazards Fire Hazards CHILDREN, Bystanders and Pets Service Dixon ZTR Residential Warranty Policy Specifications SpeedZTR 36 ModelSpeedZTR 42 Model SpeedZTR 44 Model Specifications Controls Control LeversTransmission Drive System Park BrakeTo SET Park Brake Choke Control Blade DriveThrottle Control Lever Circuit BreakerMower Deck CUT Height Lift Lever Operation Instructions Before Operating MowerStarting Instructions Unlock Transmission Towing Trailers and Other AttachmentsTo Free Wheel Machine Testing of Safety Interlock Systems Park Brake Switch TestBlade Drive Switch Test Mowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Mowing with a Grass Catcher AttachmentSide Discharge of the Clippings Grass Height and Cutting Suggestions Care and Maintenance Maintenance ScheduleCutter Blade Maintenance Engine BatteryOFF Season Battery Storage Tires LubricationChanging the Engine OIL OIL FillBelts Belt TensionNeutral Adjustment Mower Deck Leveling Procedure Deck Removal PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsEngine AIR and OIL Filters Standard Service Parts ListBlades and Belts Troubleshooting Engine Starts but Cuts OUTSkips in spots Check for loose belt/slow ground speed OWNER’S Information Date Engine TunedDixon and ZTR Are registered trademarks

ZTR 44/968999538 specifications

The Dixon ZTR 44 is a robust and versatile zero-turn riding mower that excels in delivering exceptional performance for both residential and commercial applications. Designed for efficiency and ease of use, it features a 44-inch cutting deck that allows for a wide cutting path, making it ideal for larger lawns and landscaped areas.

One of the standout features of the Dixon ZTR 44 is its powerful engine. Equipped with a durable Briggs & Stratton or Kohler engine, it offers reliable starting and ample horsepower to tackle tough grass and uneven terrain. This ensures that users can maintain their lawns in less time while achieving a professional-looking finish.

The zero-turn technology is another defining characteristic of the ZTR 44. The mower utilizes a dual hydrostatic drive system that enhances maneuverability and speed. With the ability to make sharp turns and cut in tight spaces, it reduces the time spent trimming around obstacles like trees, flower beds, and garden structures. This capability significantly improves efficiency while providing a more enjoyable mowing experience.

Comfort is key for a riding mower, and Dixon has ensured that the ZTR 44 is equipped with features that enhance operator ergonomics. The adjustable high-back seat offers support during long mowing sessions, while the easy-to-reach controls and intuitive steering give the operator complete command over the machine.

Durability is also a crucial consideration, and the ZTR 44 is built with a heavy-duty steel frame, designed to withstand the rigors of regular use. Its cutting deck is made of commercial-grade materials that not only enhance longevity but also prevent wear and tear over time. The mower's well-designed airflow ensures a clean cut, providing superior results.

Additionally, the Dixon ZTR 44 incorporates innovative technologies such as removable, easy-access maintenance panels and a simple deck height adjustment system. This allows for quick clean-up and effortless maintenance, keeping the mower in top shape throughout the mowing season.

In summary, the Dixon ZTR 44 is a capable riding mower that combines powerful performance, advanced zero-turn technology, and user-friendly features. Its robust design and innovative engineering make it an excellent choice for homeowners and professionals looking for efficiency and reliability in their lawn care equipment. Whether tackling large lawns or intricate garden layouts, the ZTR 44 delivers optimal results with every mow.
Top Page Image Contents