Dixon 13631-0702, ZTR 3363 manual Specifications, Model ZTR

Page 13

 

SPECIFICATIONS

 

Model ZTR 3303

CHASSIS:

Twin 12 gauge side frames and 7 gauge

 

transmission and engine base plate.

BODY:

All body parts made of rotational molded polyethylene.

 

Front body contains access panel for battery service.

 

Seat tilts forward to allow transmission service.

MOWER DECK:

11 GA stamped steel construction. Single 30” cut blade.

 

Cut height approximately 1”-4” via 7-position lift handle

BLADE DRIVE:

Mechanical; hand lever engagement

TRANSMISSION:

Each rear wheel is independently driven by chain and

 

sprockets through a friction mechanical drive.

ENGINE:

11 HP Briggs & Stratton Intek, 4-Cycle, Single Cylinder,

 

Overhead Valve, Air-Cooled, Gasoline, Vertical Shaft, Cast

 

Iron Cylinder, AVS (Anti-Vibration System)

STARTING SYSTEM:

Electric by key switch operation with safety interlocks

 

on parking brake and blade drive.

TIRES:

Front

11 x 4.00-5 ribbed tread.

 

Rear

16 x 6.50-8 Turf Trac R/S tread

RECOMMENDED

Front

16-21 PSI

TIRE PRESSURE:

Rear

8-14 PSI

CAPACITIES:

Fuel

2.0 gallons

 

Engine

1.25 quarts

DIMENSIONS:

Width

32.5” outside rear wheel measurement

 

Height

32.0” to top edge of seat

 

Length

65.5” hitch tab to front bumper

 

Weight

430 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Series Important Read Carefully Index Safety Warranty PolicyBlade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol Never carry passengers General OperationGeneral Operation Do not Slope OperationChildren Service Service CUT-MORE Model ZTR SpecificationsBladedrive Ene. Front body contains access panel for battery Models ZTR 3303 3304 Seat Adjustment InstructionsControl Levers ControlsTo SET Parking Brake Parking BrakeTransmission Drive System Circuit Breaker Blade DriveThrottle Control Lever Mower Deck CUT Height Lift LeverTowing Operation InstructionsBefore Operating Mower Starting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment CUT High MOW Often Mowing with a Mulching AttachmentMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Maintenance Schedule Care and MaintenanceOFF Season Battery Storage BatteryEngine TiresCutter Blade Maintenance Belt Tension BeltsDeck Removal Manual Clutch Models 3303 Place cut height lever in lowest cut position Deck Removal Electric Clutch ModelFuel Shut OFF Valve Service IntervalsLubrication ChassisOIL Fill Changing the Engine OILRear Chain Adjustment Drive System AdjustmentsMaintenance Warranty Cleaning the MowerPARTS/SERVICE Electrical SystemsEngine WON’T Turn Over TroubleshootingEngine Runs but Mower WON’T Move Forward Model ZTR 3303 Standard Service Parts ListModel ZTR Briggs & Stratton AIR and OIL Filter Part NumbersName Address Owner InformationZTRMowers

13631-0702, ZTR 3363 specifications

The Dixon ZTR 3363, model number 13631-0702, is a powerful and efficient zero-turn mower designed for both residential and commercial use. Known for its robust performance, it stands out with a range of features and technologies that enhance usability and productivity in lawn care.

One of the primary features of the Dixon ZTR 3363 is its powerful engine. Equipped with a high-performance engine, this mower can handle various terrain types, making it suitable for both flat and hilly landscapes. It's built for efficiency, allowing users to complete mowing tasks quickly and with minimal effort.

The zero-turn technology is a highlight of the Dixon ZTR 3363. This feature enables the mower to pivot on its own axis, providing unparalleled maneuverability. Users can navigate around obstacles like trees, flower beds, and fences with ease. This agility helps reduce mowing time and ensures a more precise cut, resulting in a well-manicured lawn.

In terms of cutting performance, the Dixon ZTR 3363 boasts a wide cutting deck, typically ranging from 42 to 60 inches. This design allows for a larger cutting area, enabling users to mow more grass in fewer passes. The height adjustment feature lets operators customize the cutting height based on their lawn's conditions and preferences, ensuring optimal grass health.

Another significant characteristic of the Dixon ZTR 3363 is its durable construction. Built with high-quality materials, the mower is designed to withstand the rigors of regular use. Its heavy-duty frame contributes to stability, ensuring that the mower remains steady even on uneven ground.

Additionally, comfort is a key consideration with this model. The Dixon ZTR 3363 features an ergonomic seating design, reducing operator fatigue during extended mowing sessions. The controls are strategically placed for easy access, enhancing the overall user experience.

For safety, the Dixon ZTR 3363 includes several features, such as a roll-over protection system and safety interlocks that prevent the mower from starting unless the operator is seated. This focus on safety ensures peace of mind while operating the machine.

In summary, the Dixon ZTR 3363 (13631-0702) is a versatile, powerful zero-turn mower that combines cutting-edge technology with user-friendly features. Its robust engine, maneuverability, cutting efficiency, durability, and comfort make it an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency.
Top Page Image Contents