Dixon ZTR 3363, 13631-0702 manual Bladedrive

Page 14

SPECIFICATIONS

 

Model

ZTR 3304

CHASSIS:

Twin 12 gauge side frames and 7 gauge transmission

 

and engine base plate.

BODY:

All body parts are made of rotational molded poly-

 

ethylene. Front body contains access panel for

 

battery service. Seat tilts forward to allow trans-

 

mission service.

MOWER DECK:

11 GA stamped steel construction. Single 30" cut

 

blade. Cut height approximately 1" to 4" via 7 position lift

 

handle.

 

BLADEDRIVE:

Mechanical; hand lever engagement.

TRANSMISSION:

Each rear wheel is independently driven by chain and

 

sprockets through a friction mechanical drive.

ENGINE:

13.5 HP Briggs & Stratton Intek,4-Cycle, Single

 

Cylinder, Overhead Valve, Air-Cooled, Gasoline,

 

Vertical Shaft, Cast Iron Cylinder, AVS (Anti Vibration

 

System), Pressure Lube & Filter

STARTING SYSTEM:

Electric by key switch operation with safety interlocks on

 

parking brake and blade drive.

TIRES:

Front

11 X 4.00-5 ribbed tread.

 

Rear

16 X 6.50-8 Turf Trac R/S tread.

RECOMMENDED

Front

16-21 PSI

TIRE PRESSURE:

Rear

8-14 PSI

CAPACITIES:

Fuel

2.0 gallons

 

Engine

1.25 quarts

DIMENSIONS:

Width

32.5" outside rear wheel measurement.

 

Height

32.0" to top edge of seat.

 

Length

65.5" hitch tab to front bumper.

 

Weight

440 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Series Important Read Carefully Safety Warranty Policy IndexSafety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation Never carry passengersGeneral Operation Slope Operation Do notChildren Service Service CUT-MORE Specifications Model ZTRBladedrive Ene. Front body contains access panel for battery Seat Adjustment Instructions Models ZTR 3303 3304Controls Control LeversTransmission Drive System Parking BrakeTo SET Parking Brake Throttle Control Lever Blade DriveCircuit Breaker Mower Deck CUT Height Lift LeverOperation Instructions TowingBefore Operating Mower Starting Instructions Engine should Stop Testing of Safety Interlock SystemsParking Brake Switch Test Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Care and Maintenance Maintenance ScheduleEngine BatteryOFF Season Battery Storage TiresCutter Blade Maintenance Belts Belt TensionDeck Removal Manual Clutch Models 3303 Deck Removal Electric Clutch Model Place cut height lever in lowest cut positionLubrication Service IntervalsFuel Shut OFF Valve ChassisChanging the Engine OIL OIL FillMaintenance Drive System AdjustmentsRear Chain Adjustment PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsTroubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Model ZTR Standard Service Parts ListModel ZTR 3303 Briggs & Stratton AIR and OIL Filter Part NumbersOwner Information Name AddressZTRMowers

13631-0702, ZTR 3363 specifications

The Dixon ZTR 3363, model number 13631-0702, is a powerful and efficient zero-turn mower designed for both residential and commercial use. Known for its robust performance, it stands out with a range of features and technologies that enhance usability and productivity in lawn care.

One of the primary features of the Dixon ZTR 3363 is its powerful engine. Equipped with a high-performance engine, this mower can handle various terrain types, making it suitable for both flat and hilly landscapes. It's built for efficiency, allowing users to complete mowing tasks quickly and with minimal effort.

The zero-turn technology is a highlight of the Dixon ZTR 3363. This feature enables the mower to pivot on its own axis, providing unparalleled maneuverability. Users can navigate around obstacles like trees, flower beds, and fences with ease. This agility helps reduce mowing time and ensures a more precise cut, resulting in a well-manicured lawn.

In terms of cutting performance, the Dixon ZTR 3363 boasts a wide cutting deck, typically ranging from 42 to 60 inches. This design allows for a larger cutting area, enabling users to mow more grass in fewer passes. The height adjustment feature lets operators customize the cutting height based on their lawn's conditions and preferences, ensuring optimal grass health.

Another significant characteristic of the Dixon ZTR 3363 is its durable construction. Built with high-quality materials, the mower is designed to withstand the rigors of regular use. Its heavy-duty frame contributes to stability, ensuring that the mower remains steady even on uneven ground.

Additionally, comfort is a key consideration with this model. The Dixon ZTR 3363 features an ergonomic seating design, reducing operator fatigue during extended mowing sessions. The controls are strategically placed for easy access, enhancing the overall user experience.

For safety, the Dixon ZTR 3363 includes several features, such as a roll-over protection system and safety interlocks that prevent the mower from starting unless the operator is seated. This focus on safety ensures peace of mind while operating the machine.

In summary, the Dixon ZTR 3363 (13631-0702) is a versatile, powerful zero-turn mower that combines cutting-edge technology with user-friendly features. Its robust engine, maneuverability, cutting efficiency, durability, and comfort make it an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency.
Top Page Image Contents