Dixon 13631-0702, ZTR 3363 manual Blade Drive, Circuit Breaker, Throttle Control Lever

Page 19

CONTROLS

BLADE DRIVE: Models ZTR 3303 & 3304

•Located to left of the operator.

•To engage the mower blade, turn lever on floor slowly to the “ON” position.

•To disengage mower blade, turn lever to the “OFF” position.

BLADE DRIVE:

Model ZTR 3363

•Located on the control panel, operator’s right.

•To engage mower blades, pull up on the switch.

•To disengage blades, push down.

CIRCUIT BREAKER:

•Protection of the electrical system is by (1) 15 amp circuit breaker.

•If circuit breaker trips, push button to reset.

•If this condition repeats, consult dealer for inspection and repair.

THROTTLE CONTROL LEVER:

•Located on control panel to operator’s right.

•Throttle control for engine speed.

•Choke for engine starting.

•Throttle control should be set to MAXIMUM or wide open setting to ensure adequate cooling of the engine and to maintain mower deck blade speed while mowing.

MOWER DECK CUT HEIGHT LIFT LEVER:

•Located to the left of the operator.

•Controls the cutting height.

•Seven positions of adjustment.

•Move lever in and forward to lower.

•Move lever in and back to raise.

NOTE: Always use high for transport.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Series Important Read Carefully Index Safety Warranty PolicyBlade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol Never carry passengers General OperationGeneral Operation Do not Slope OperationChildren Service Service CUT-MORE Model ZTR SpecificationsBladedrive Ene. Front body contains access panel for battery Models ZTR 3303 3304 Seat Adjustment InstructionsControl Levers ControlsTo SET Parking Brake Parking BrakeTransmission Drive System Mower Deck CUT Height Lift Lever Blade DriveCircuit Breaker Throttle Control LeverTowing Operation InstructionsBefore Operating Mower Starting Instructions Parking Brake Switch Test Testing of Safety Interlock SystemsEngine should Stop Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment CUT High MOW Often Mowing with a Mulching AttachmentMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Maintenance Schedule Care and MaintenanceTires BatteryOFF Season Battery Storage EngineCutter Blade Maintenance Belt Tension BeltsDeck Removal Manual Clutch Models 3303 Place cut height lever in lowest cut position Deck Removal Electric Clutch ModelChassis Service IntervalsFuel Shut OFF Valve LubricationOIL Fill Changing the Engine OILRear Chain Adjustment Drive System AdjustmentsMaintenance Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEEngine WON’T Turn Over TroubleshootingEngine Runs but Mower WON’T Move Forward Briggs & Stratton AIR and OIL Filter Part Numbers Standard Service Parts ListModel ZTR 3303 Model ZTRName Address Owner InformationZTRMowers

13631-0702, ZTR 3363 specifications

The Dixon ZTR 3363, model number 13631-0702, is a powerful and efficient zero-turn mower designed for both residential and commercial use. Known for its robust performance, it stands out with a range of features and technologies that enhance usability and productivity in lawn care.

One of the primary features of the Dixon ZTR 3363 is its powerful engine. Equipped with a high-performance engine, this mower can handle various terrain types, making it suitable for both flat and hilly landscapes. It's built for efficiency, allowing users to complete mowing tasks quickly and with minimal effort.

The zero-turn technology is a highlight of the Dixon ZTR 3363. This feature enables the mower to pivot on its own axis, providing unparalleled maneuverability. Users can navigate around obstacles like trees, flower beds, and fences with ease. This agility helps reduce mowing time and ensures a more precise cut, resulting in a well-manicured lawn.

In terms of cutting performance, the Dixon ZTR 3363 boasts a wide cutting deck, typically ranging from 42 to 60 inches. This design allows for a larger cutting area, enabling users to mow more grass in fewer passes. The height adjustment feature lets operators customize the cutting height based on their lawn's conditions and preferences, ensuring optimal grass health.

Another significant characteristic of the Dixon ZTR 3363 is its durable construction. Built with high-quality materials, the mower is designed to withstand the rigors of regular use. Its heavy-duty frame contributes to stability, ensuring that the mower remains steady even on uneven ground.

Additionally, comfort is a key consideration with this model. The Dixon ZTR 3363 features an ergonomic seating design, reducing operator fatigue during extended mowing sessions. The controls are strategically placed for easy access, enhancing the overall user experience.

For safety, the Dixon ZTR 3363 includes several features, such as a roll-over protection system and safety interlocks that prevent the mower from starting unless the operator is seated. This focus on safety ensures peace of mind while operating the machine.

In summary, the Dixon ZTR 3363 (13631-0702) is a versatile, powerful zero-turn mower that combines cutting-edge technology with user-friendly features. Its robust engine, maneuverability, cutting efficiency, durability, and comfort make it an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency.
Top Page Image Contents