Dixon ZTR 3363, 13631-0702 manual Cutter Blade Maintenance

Page 32

CARE AND MAINTENANCE

CUTTER BLADE MAINTENANCE:

CAUTION Stop engine and remove ignition key for safety. Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

Check sharpness of mower blades after every 10 hours of operation. Observe proper blade position prior to removal.

1.Safely raise front of mower.

2.Hold or block blade from turning.

3.Loosen blade nut and remove

blade.

4.When replacing blade, tighten

blade nut securely. Refer to diagram. Be sure blade is centered on pilot before tightening nut to 60 ft. lbs.

(No trash guard on 30”)

Blades should be discarded when worn excessively.

DANGEROUS!

DO NOT USE

BLADE IN THIS

CONDITION!

New Blade

When notch starts, discard blade

Image 32

Contents Series Important Read Carefully Safety Warranty Policy IndexSafety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation Never carry passengersGeneral Operation Slope Operation Do notChildren Service Service CUT-MORE Specifications Model ZTRBladedrive Ene. Front body contains access panel for battery Seat Adjustment Instructions Models ZTR 3303 3304Controls Control LeversTransmission Drive System Parking BrakeTo SET Parking Brake Blade Drive Circuit BreakerThrottle Control Lever Mower Deck CUT Height Lift LeverOperation Instructions TowingBefore Operating Mower Starting Instructions Engine should Stop Testing of Safety Interlock SystemsParking Brake Switch Test Side Discharge of the Clippings Grass Height and Cutting Suggestions Mowing with a Mulching Attachment Mowing with a Mulching Attachment CUT High MOW OftenMowing with a Grass Catcher Attachment Mowing with a Grass Catcher Attachment Care and Maintenance Maintenance ScheduleBattery OFF Season Battery StorageEngine TiresCutter Blade Maintenance Belts Belt TensionDeck Removal Manual Clutch Models 3303 Deck Removal Electric Clutch Model Place cut height lever in lowest cut positionService Intervals Fuel Shut OFF ValveLubrication ChassisChanging the Engine OIL OIL FillMaintenance Drive System AdjustmentsRear Chain Adjustment Cleaning the Mower WarrantyPARTS/SERVICE Electrical SystemsTroubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Standard Service Parts List Model ZTR 3303Model ZTR Briggs & Stratton AIR and OIL Filter Part NumbersOwner Information Name AddressZTRMowers

13631-0702, ZTR 3363 specifications

The Dixon ZTR 3363, model number 13631-0702, is a powerful and efficient zero-turn mower designed for both residential and commercial use. Known for its robust performance, it stands out with a range of features and technologies that enhance usability and productivity in lawn care.

One of the primary features of the Dixon ZTR 3363 is its powerful engine. Equipped with a high-performance engine, this mower can handle various terrain types, making it suitable for both flat and hilly landscapes. It's built for efficiency, allowing users to complete mowing tasks quickly and with minimal effort.

The zero-turn technology is a highlight of the Dixon ZTR 3363. This feature enables the mower to pivot on its own axis, providing unparalleled maneuverability. Users can navigate around obstacles like trees, flower beds, and fences with ease. This agility helps reduce mowing time and ensures a more precise cut, resulting in a well-manicured lawn.

In terms of cutting performance, the Dixon ZTR 3363 boasts a wide cutting deck, typically ranging from 42 to 60 inches. This design allows for a larger cutting area, enabling users to mow more grass in fewer passes. The height adjustment feature lets operators customize the cutting height based on their lawn's conditions and preferences, ensuring optimal grass health.

Another significant characteristic of the Dixon ZTR 3363 is its durable construction. Built with high-quality materials, the mower is designed to withstand the rigors of regular use. Its heavy-duty frame contributes to stability, ensuring that the mower remains steady even on uneven ground.

Additionally, comfort is a key consideration with this model. The Dixon ZTR 3363 features an ergonomic seating design, reducing operator fatigue during extended mowing sessions. The controls are strategically placed for easy access, enhancing the overall user experience.

For safety, the Dixon ZTR 3363 includes several features, such as a roll-over protection system and safety interlocks that prevent the mower from starting unless the operator is seated. This focus on safety ensures peace of mind while operating the machine.

In summary, the Dixon ZTR 3363 (13631-0702) is a versatile, powerful zero-turn mower that combines cutting-edge technology with user-friendly features. Its robust engine, maneuverability, cutting efficiency, durability, and comfort make it an excellent choice for anyone looking to achieve a pristine lawn with ease and efficiency.