Dixon ZTR 2301 manual Drive System Adjustments, Rear Chain Adjustment

Page 35

CARE AND MAINTENANCE

DRIVE SYSTEM ADJUSTMENTS:

Due to both the complex nature of the transmission and the number of special tools required for service, adjustments should be entrusted to your dealer.

There are a number of simple owner service items which greatly influence the performance of the drive system.

1.Front and rear tires must be inflated to proper specifications.

2.Rear drive chain tension.

3.Tightness of all controls and linkages pertaining to the drive levers.

4.Lubrication of both primary and final drive chains. The use of a high quality chain lubricant is highly recommended.

REAR CHAIN ADJUSTMENT:

Proper tension for the rear drive chains is accomplished through the use of an "automatic" adjuster located at mid-point of each rear chain.

Maintenance:

Periodically remove any build up of grass, mud or other debris from both the spring loaded roller and the upper guide rod. The use of a penetrating lubricant on the springs and rod is recommended as a rust preventative.

Page 35

Image 35

Contents Model ZTR Dixon Limited Warranty Policy -- Model ZTR Body DimensionsSpecifications Subject to Change Without Notice ChassisSpare Parts Series Dixon INDUSTRIES, INC Important Read CarefullyIndex Safety Safety Symbols General Operation Do not Slope OperationChildren Service Dixon Protection Plus TWO Year Limited Warranty Policy Model ZTR SpecificationsShroud Mower Decks Models ZTR 3303 ZTR 3304 ZTR Seat Adjustment InstructionsControls Transmission Drive System Parking BrakeTo SET Parking Brake Braking To GO ForwardTo GO Backward TurningCircuit Breaker Before Operating Mower Operation InstructionsEngine should not turn over or attempt to start Testing of Safety Interlock SystemsStarting Instructions CUT High MOW Often Mowing with a Mulching AttachmentMaintain Sharp Blades Throughout The Cutting Season Mowing with a Grass Catcher AttachmentGrass Height Suggestions Side Discharge of the ClippingsBattery Care and MaintenanceMaintenance Schedule Cutter Blade Maintenance Deck REMOVAL-MANUAL CLUTCH-MODELS 3303 Belt TensionPlace cut height lever in lowest cut position Deck Removal Electric Clutch Model ZTRLocations Service IntervalsFuel Shut OFF Valve LubricationOIL Fill Changing the Engine OILRear Chain Adjustment Drive System AdjustmentsWheels and Tires Cleaning the MowerWarranty PARTS/SERVICEBelts Standard Service Parts ListBriggs & Stratton AIR Filter Part Numbers BladesSituation Causes Remedy TroubleshootingMower CUT Quality Drive System Electrical System Date OIL Changed Date Engine Tuned Owner InformationSeries