Dixon ZTR 3362 manual Seat Adjustment Instructions

Page 14

SEAT ADJUSTMENT INSTRUCTIONS

Models ZTR 3303 - ZTR 3304 - ZTR 3362

1.Raise and push seat assembly forward.

2.Model ZTR 3303 - loosen four seat bolts, P/N 3077, and slide seat forward or backward to desired position.

Models ZTR 3304 & ZTR 3362 - Loosen five nuts, P/N 3205, and slide seat forward or backward to desired position.

3.Re-tighten seat adjustment bolts, P/N 3077, or nuts, P/N 3205. DO NOT operate mower without seat adjustments properly tightened.

4.Push seat assembly back to closed position.

Page 11

Image 14

Contents Page Important Read Carefully Index Blade Contact TIP-OVER RUN-OVERSafety Symbols Safety Slope Operation Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Model ZTR3304 Handle Seat Adjustment Instructions Controls Parking Brake Turning To GO ForwardTo GO Backward BrakingMower Deck CUT Height Lift Lever Circuit BreakerOperation Instructions Operation Instructions Starting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsCare and Maintenance 3000 Series Models Maintenance ScheduleCutter Blade Maintenance Page24 Deck Removal Electric Clutch Model ZTR Fuel Shut OFF Valve Changing the Engine OIL Models ZTR 3303 ZTR 3304 ZTR Drive System Adjustments Rear Chain AdjustmentAnimals in Your Area Model ZTR Briggs & Stratton AIR Filter Part NumbersTroubleshooting Drive System Situation Causes Electrical System Situation Causes Owner Information Blount Company