Dixon ZTR 3362 manual Cutter Blade Maintenance

Page 26

CARE AND MAINTENANCE - 3000 SERIES MODELS

CUTTER BLADE MAINTENANCE:

NOTE: Observe proper blade position prior to removal.

1.Safely raise front of mower.

2.Hold or block blade from turning.

Wear heavy, thick gloves when holding onto cutter blade, avoid the sharp edge of the blade.

NOTE: Be sure blade is centered on pilot before tightening bolt to 60 ft. Ibs. torque.

Page23

Image 26

Contents Page Important Read Carefully Index Blade Contact TIP-OVER RUN-OVERSafety Symbols Safety Slope Operation Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Model ZTR3304 Handle Seat Adjustment Instructions Controls Parking Brake Turning To GO ForwardTo GO Backward BrakingMower Deck CUT Height Lift Lever Circuit BreakerOperation Instructions Operation Instructions Starting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsCare and Maintenance 3000 Series Models Maintenance ScheduleCutter Blade Maintenance Page24 Deck Removal Electric Clutch Model ZTR Fuel Shut OFF Valve Changing the Engine OIL Models ZTR 3303 ZTR 3304 ZTR Drive System Adjustments Rear Chain AdjustmentAnimals in Your Area Model ZTR Briggs & Stratton AIR Filter Part NumbersTroubleshooting Drive System Situation Causes Electrical System Situation Causes Owner Information Blount Company