Dixon ZTR 3362 manual Changing the Engine OIL Models ZTR 3303 ZTR 3304 ZTR

Page 30

CARE AND MAINTENANCE - 3000 SERIES MODELS

CAUTION

HOT oil may cause burns.

Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL: MODELS ZTR 3303 - ZTR 3304 - ZTR 3362

1.The "snap lock" oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.

3.Push the valve body in and twist to clear the detent notch.

4.Pulling the valve body outward will start the flow of oil.

NOTE: Refer to engine manufacturers recommendations for frequency of oil changes.

OIL FILL:

1.Push the valve body in and twist into the detent notch.

2.Clean any spilled oil from engine and chassis.

3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. PROTECT YOUR ENVIRONMENT

Page27

Image 30
Contents Page Important Read Carefully Index Blade Contact TIP-OVER RUN-OVERSafety Symbols Safety Slope Operation Children Service Dixon Protection Plus TWO Year Limited Warranty Policy Specifications Model ZTR3304 Handle Seat Adjustment Instructions Controls Parking Brake Turning To GO ForwardTo GO Backward BrakingMower Deck CUT Height Lift Lever Circuit BreakerOperation Instructions Operation Instructions Starting Instructions Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintain Sharp Blades Throughout The Cutting SeasonSide Discharge of the Clippings Grass Height SuggestionsCare and Maintenance 3000 Series Models Maintenance ScheduleCutter Blade Maintenance Page24 Deck Removal Electric Clutch Model ZTR Fuel Shut OFF Valve Changing the Engine OIL Models ZTR 3303 ZTR 3304 ZTR Drive System Adjustments Rear Chain AdjustmentAnimals in Your Area Model ZTR Briggs & Stratton AIR Filter Part NumbersTroubleshooting Drive System Situation Causes Electrical System Situation Causes Owner Information Blount Company