Dixon SE 5225 KOH CE, 966057501 manual Adjusting the Mower Deck, Leveling deck

Page 42

MAINTENANCE

Adjusting the Mower Deck

Leveling deck

Adjust the deck while the mower is on a level surface. Make sure the tires are inflated to the correct pressure. See “Technical Data” under Transmission. If tires are under or over inflated, you cannot properly adjust your deck.

Four slots control the height and pitch of the mower deck. The deck should be adjusted slightly higher in the rear.

NOTE:To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling deck.

1.Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner.

2.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment

is required, loosen the locknut and move mounting bolt up or down in slot until both side-to-side measurements are equal. Retain measurement.

3.Turn both outer blades to align with the deck in front-to-rear manner. Reposition rear mounting bolts up or down until rear of mower deck is positioned level to 1/8" higher in the rear than the side-to-side measurement.

4.Confirm measurements once again. Blade tips should be level in a side-to-side manner. In the rear, blade tips should be level to 1/8" higher than side-to-side measurement. In the front, blade tips should be level to 1/8" lower than side-to-side measurement.

NOTE: This will place the mower deck in a base measurement position. Additional adjustment may be required to achieve desired cut for the type of grass or conditions being mowed.

WARNING!

Before performing any service or adjustment checklist:

•Engage the parking brake.

•Place the Blade switch in the disengaged position.

•Turn ignition switch to “OFF” position and remove the key.

•Make sure the blades and all moving parts have completely stopped.

•Disconnect the spark plug wire from all spark plugs and place the wire where it cannot come in contact with the plug.

1

2

2

8050-829

1.Lift arm

2.Mounting bolts

Leveling the mower deck

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Operator Manual Page Contents Page Introduction Good Service Manufacturing NumberSymbols and decals Performing any Safety Safety InstructionsGeneral Operation Never take passengers Personal Safety Equipment Slope OperationChildren Safe Handling of Gasoline General Maintenance Risk of sparking Transport Customer ResponsibilitiesRollover Protection system Rops Controls Control LocationsSteering Control Levers Blade Switch Parking BrakeThrottle Control Ignition Switch Choke ControlFuses Fuel Tank Cutting Height Adjuster Fuel Shut Off ValveAlways raise the deck to the highest position for transport Seat Adjustment Lever Hour MeterTraining SteeringBefore Starting Starting the EnginePlace controls in neutral position Care not to short against chassis Weak BatteryPositive + terminal on each battery, taking To remove cables, reverse orderEnsure that no one is near mower when engaging blade switch RunningOperating On Hills Mowing Tips Stopping the Engine Manually Moving Unit Pump release valvesDaily Maintenance interval Least Hours Once Each MaintenanceMaintenance Schedule Before After Year 250 500Daily At least Maintenance interval Once Hours Each Replacing battery BatteryCleaning battery and terminals Always wear eye protection when around batteriesSafety System Fuel FilterTire Pressures Deck belt installation BeltsDeck Belt Belt installation Pump Belt Replacing pump beltBelt removal Blade replacement Cutting BladesAdjusting the Mower Deck Leveling deckAnti-scalp rollers Removal and installation of caster wheel CleaningUse protective glasses when cleaning and washing Caster WheelsLubrication GeneralDeck Spindle Front Wheel MountFront Wheel Bearings Deck Outer SpindleHydraulic Pump Fluid ChangePurging Troubleshooting Troubleshooting Service StorageWinter Storage Schematics Technical Data 966057501 EngineTransmission Dimension 965871801 FrameVibration Accessories Torque SpecificationsUSA Requirements CE RequirementsZero Turn Ride-on Mower Service Journal Delivery ServiceAction Date, mtr reading, stamp, sign Hour Service After 5-8 HoursPerform the 25-hour service At Least Once Each Year Service Journal Service Journal Service Journal Page 115 248226R1 01/28/10

966057501, SE 5225 KOH CE specifications

The Dixon SE 5225 KOH CE,966057501 is an advanced piece of equipment designed for professionals seeking both power and efficiency in their operations. This model is recognized for its robust construction and innovative features, making it suitable for various applications in demanding environments.

One of the key highlights of the Dixon SE 5225 is its versatility. It is equipped with a powerful engine that delivers impressive performance, ensuring that tasks are completed efficiently and effectively. The machine is capable of handling heavy loads while maintaining stability, which is crucial for safety in operational settings.

The SE 5225 also incorporates advanced technologies that enhance its functionality. For instance, it features a state-of-the-art control system that allows for precise handling and monitoring. This ensures that users have complete command over the machine's operations, leading to increased productivity and reduced operational downtime. Additionally, the model boasts a user-friendly interface, making it accessible to operators with varying levels of expertise.

Another significant characteristic of the Dixon SE 5225 is its durability. Constructed with high-quality materials that resist wear and tear, this equipment is designed to withstand the rigors of daily use. The engineering behind the machine emphasizes not only strength but also ease of maintenance, ensuring that upkeep is straightforward and cost-effective.

Moreover, the SE 5225 is designed with safety in mind. It includes multiple safety features, such as emergency shut-off systems and protective enclosures, to minimize the risk of accidents. These aspects are crucial for operations where safety is a top priority.

In terms of efficiency, the SE 5225 excels with its fuel economy features, making it an environmentally friendly option without compromising on power. This aligns with the industry's growing emphasis on sustainable practices while maintaining the performance required for professional tasks.

In conclusion, the Dixon SE 5225 KOH CE,966057501 stands out as a reliable and efficient solution for those in need of heavy-duty equipment. Its blend of power, advanced technology, and safety features make it an ideal choice for professionals looking to enhance their operational capabilities and achieve superior results in various applications. Whether in construction, logistics, or any other demanding field, this model is engineered to deliver.
Top Page Image Contents