Dixon ZTR 8025 manual Grass Height Suggestions

Page 21

OPERATION INSTRUCTIONS

In order to achieve optimum cutting performance, please read and follow the tips listed below.

Additional information can be found in the troubleshooting guide beginning on page 35.

CAUTION

Be sure that deflector is properly installed on the

discharge chute.

1.Set engine speed control to the wide open or full setting.

2.Do Not Attempt To Cut Grass When It Is Wet. Wet grass will clog the under- side of the deck and discharge area.

3.If the grass is tall, place the mower deck cut height lever in the top or sec- ond notch. "Initially" overlap cutting swaths instead of a full swath with each pass. Some applications may require a second cutting.

4.Keep The Underside Of The Mower Deck Clean. Frequent removal of dried grass and dirt will allow the clippings to discharge correctly.

5.Maintain Sharp Blade(s) Throughout The Cutting Season.

GRASS HEIGHT SUGGESTIONS:

Correct mowing height can reduce weeds and disease by 50% to 80%

The following grass cut heights are based on adequate moisture conditions and normal thatch buildup in a healthy lawn. Some locations and applications may require slightly different cut heights. If in doubt, consult your local lawn pro- fessional for assistance.

Grass Types:

Best Cut Heights:

Zoysia

 

2" - 2 1/2"

Blue Grass

 

1 1/2" - 3"

Fescue Blends

 

1 1/2" - 3"

St. Augustine (Mid South)

 

1 1/2" - 2"

St. Augustine (Deep South)

3" - 4"

Tifton Bermuda

 

1 1/2"

Centipede

 

1 1/2" - 2"

Common Bermuda

 

1 1/2" - 2"

Bahia/Argentina/Pensacola

2"

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents ZTR Mowers Important Read Carefully Index Safety Safety Alert Symbol General Operation Slope Operation Children Service Dixon Limited Warranty Policy Commercial Models Specifications Seat Adjustment Instructions Controls Parking Brake Controls Controls Operation Instructions Testing of Safety Interlock Systems Operation Instructions Starting Instructions Grass Height Suggestions Maintenance Schedule Care and MaintenanceEngine Belts Mower BladesChecking & Replenishing OIL in HYDRO- Static Transmission LubricationParking Brake Adjustment Hydrostatic Transmissions Hydrostat Drive Belt Replacement PRO- CedureNew instructions & graphics Steering Control AdjustmentsNew Structions Leveling the Deck New instructions & graphicsProcedure for Raising and Lowering the Deck For Servicing Care and Maintenance Standard Service Parts List Troubleshooting Clean Page Page Owner Information Series

ZTR 8025 specifications

The Dixon ZTR 8025 is a standout zero-turn radius mower, designed for both residential and commercial use. It combines power, precision, and comfort, making it a preferred choice for landscaping professionals and homeowners alike. This mower showcases advanced engineering, robust features, and innovative technologies that cater to the diverse needs of modern lawn care.

One of the key features of the Dixon ZTR 8025 is its powerful engine. Equipped with a reliable Kawasaki or Briggs & Stratton engine, the mower delivers exceptional performance with smooth acceleration and superior torque. This power ensures that even the toughest lawns are no match for the ZTR 8025.

The zero-turn capability is another highlight, allowing users to maneuver around obstacles with ease. The dual-lever steering system enables precise directional control, allowing users to cut around trees, flower beds, and other landscape features without leaving uncut patches. This efficiency significantly reduces mowing time while enhancing the overall quality of the finished lawn.

The ZTR 8025 is constructed with durability in mind. Its heavy-duty steel frame and reinforced cutting deck are designed to withstand the rigors of frequent use. The cutting deck itself features a wide width, typically around 48 to 52 inches, providing a clean and efficient cut. The deck height can be easily adjusted to achieve the desired grass length, accommodating different types of grass and conditions.

Another notable characteristic is the comfort and ergonomic design. The mower is equipped with a comfortable high-back seat that provides ample support for extended mowing sessions. The layout of the controls is intuitive, allowing for easy operation, even for new users. With a well-placed cup holder and ample foot space, the ZTR 8025 makes mowing a more enjoyable experience.

The mower also features advanced technologies such as a built-in hour meter, which helps track maintenance intervals, ensuring that the mower operates at peak efficiency. Furthermore, the ZTR 8025 can be fitted with various attachments and accessories, enhancing its versatility for different tasks beyond mowing, such as mulching or bagging leaves.

In summary, the Dixon ZTR 8025 stands out in the crowded lawn mower market with its powerful engine, zero-turn capabilities, durable construction, and user-friendly design. Whether for professional landscaping or home use, it delivers unmatched performance and efficiency, making it an investment that pays off in both time and quality results.
Top Page Image Contents