Dixon ZTR 8025 manual New Structions

Page 29

CARE AND MAINTENANCE

STEERING CONTROL ADJUSTMENTS (continued):

D.Adjusting for Straight Forward Tracking:

In large open area, actuate the control handles into the full forward position. If the mower veers in either direction (left or right) some adjustment is necessary.

1.If the mower veers to the right, then the right hydrostat needs to be

sped up. If the

mower veers to the left, then the left hydrostat

needs to be sped up.

 

2.Stop the machine and shut off the engine.

3.Slightly loosen the bolt at the lower end of the upper linkage assembly

on the side that

is slower. Using a 1/8" Allen wrench turn the

setscrew 1/4 turn in. It may take several

test drives to get the

mower to track straight forward.

 

4.Once the tracking is to the operator's liking, completely tighten the

bolt on the control

linkage assembly that was loosened

earlier.

 

 

 

5.

Recheck to make sure neutral adjust has not been effected, see

procedure A.

Steering Control

Inward Stop

Lever

Setscrew

new in-

structions &

Forward

Reverse Stop

Setscrew

graphics. Access

Stop

 

Setscrew

 

Hole

Rod End Ball

 

JointLH Locknut

 

 

 

 

Turn this

 

 

rod to

 

 

Adjust

 

Upper linkage As-

 

sembly

Neutral

 

 

 

Setscrew used to

RH Locknut

 

 

adjust Forward Tracking

Loosen Bolt on Linkage

29

Image 29
Contents ZTR Mowers Important Read Carefully Index Safety Safety Alert Symbol General Operation Slope Operation Children Service Dixon Limited Warranty Policy Commercial Models Specifications Seat Adjustment Instructions Controls Parking Brake Controls Controls Operation Instructions Testing of Safety Interlock Systems Operation Instructions Starting Instructions Grass Height Suggestions Maintenance Schedule Care and MaintenanceEngine Belts Mower BladesChecking & Replenishing OIL in HYDRO- Static Transmission LubricationParking Brake Adjustment Hydrostatic Transmissions Hydrostat Drive Belt Replacement PRO- CedureNew instructions & graphics Steering Control AdjustmentsNew Structions Leveling the Deck New instructions & graphicsProcedure for Raising and Lowering the Deck For Servicing Care and Maintenance Standard Service Parts List Troubleshooting Clean Page Page Owner Information Series

ZTR 8025 specifications

The Dixon ZTR 8025 is a standout zero-turn radius mower, designed for both residential and commercial use. It combines power, precision, and comfort, making it a preferred choice for landscaping professionals and homeowners alike. This mower showcases advanced engineering, robust features, and innovative technologies that cater to the diverse needs of modern lawn care.

One of the key features of the Dixon ZTR 8025 is its powerful engine. Equipped with a reliable Kawasaki or Briggs & Stratton engine, the mower delivers exceptional performance with smooth acceleration and superior torque. This power ensures that even the toughest lawns are no match for the ZTR 8025.

The zero-turn capability is another highlight, allowing users to maneuver around obstacles with ease. The dual-lever steering system enables precise directional control, allowing users to cut around trees, flower beds, and other landscape features without leaving uncut patches. This efficiency significantly reduces mowing time while enhancing the overall quality of the finished lawn.

The ZTR 8025 is constructed with durability in mind. Its heavy-duty steel frame and reinforced cutting deck are designed to withstand the rigors of frequent use. The cutting deck itself features a wide width, typically around 48 to 52 inches, providing a clean and efficient cut. The deck height can be easily adjusted to achieve the desired grass length, accommodating different types of grass and conditions.

Another notable characteristic is the comfort and ergonomic design. The mower is equipped with a comfortable high-back seat that provides ample support for extended mowing sessions. The layout of the controls is intuitive, allowing for easy operation, even for new users. With a well-placed cup holder and ample foot space, the ZTR 8025 makes mowing a more enjoyable experience.

The mower also features advanced technologies such as a built-in hour meter, which helps track maintenance intervals, ensuring that the mower operates at peak efficiency. Furthermore, the ZTR 8025 can be fitted with various attachments and accessories, enhancing its versatility for different tasks beyond mowing, such as mulching or bagging leaves.

In summary, the Dixon ZTR 8025 stands out in the crowded lawn mower market with its powerful engine, zero-turn capabilities, durable construction, and user-friendly design. Whether for professional landscaping or home use, it delivers unmatched performance and efficiency, making it an investment that pays off in both time and quality results.