Dixon ZTR 8025 manual Mower Blades, Belts

Page 24

CARE AND MAINTENANCE

Stop engine, remove ignition key and spark plugs for

CAUTIONsafety. Wear

heavy, thick gloves when holding onto

cutter blade, avoid the sharp

edge of the blade.

MOWER BLADES:

 

Check sharpness of mower blades after every 10 hours of operation.

To sharpen

blades, proceed as follows.

??A. Remove bolt, lock washer, and cup washer mounting blade on

shaft.

Remove blade.

B.Blades should be discarded when worn excessively.

C.Sharpen blade with a hand file, electric grinder or blade sharp-

ener. Weargloves and eye protection when sharpening. Grind blade at original 25

degree bevel.

D.Check balance of blade by positioning the blade on a nail or

blade balance

 

pedestal. Grind the blade on the end that is

heavier until both sides balance.

 

DANGER-

 

 

 

OUS!

E.

 

 

DO NOT USE

Install blade, cup washer, lock washer and bolt. Make sure to

tighten bolt to 60

 

ft. lbs.

BLADE IN

New

THIS

 

Blade

 

CONDITION!

 

 

 

 

25

 

When notch starts,

 

degrees

 

discard blade

BELTS:

Check belts every 50 hours. Replace any belts found to be in poor

condition.

All belts are equipped with spring loaded belt tighteners and do not

require tightening

adjustments.

24

Image 24
Contents ZTR Mowers Important Read Carefully Index Safety Safety Alert Symbol General Operation Slope Operation Children Service Dixon Limited Warranty Policy Commercial Models Specifications Seat Adjustment Instructions Controls Parking Brake Controls Controls Operation Instructions Testing of Safety Interlock Systems Operation Instructions Starting Instructions Grass Height Suggestions Care and Maintenance Maintenance ScheduleEngine Mower Blades BeltsLubrication Checking & Replenishing OIL in HYDRO- Static TransmissionParking Brake Adjustment Hydrostat Drive Belt Replacement PRO- Cedure Hydrostatic TransmissionsSteering Control Adjustments New instructions & graphicsNew Structions New instructions & graphics Leveling the DeckProcedure for Raising and Lowering the Deck For Servicing Care and Maintenance Standard Service Parts List Troubleshooting Clean Page Page Owner Information Series

ZTR 8025 specifications

The Dixon ZTR 8025 is a standout zero-turn radius mower, designed for both residential and commercial use. It combines power, precision, and comfort, making it a preferred choice for landscaping professionals and homeowners alike. This mower showcases advanced engineering, robust features, and innovative technologies that cater to the diverse needs of modern lawn care.

One of the key features of the Dixon ZTR 8025 is its powerful engine. Equipped with a reliable Kawasaki or Briggs & Stratton engine, the mower delivers exceptional performance with smooth acceleration and superior torque. This power ensures that even the toughest lawns are no match for the ZTR 8025.

The zero-turn capability is another highlight, allowing users to maneuver around obstacles with ease. The dual-lever steering system enables precise directional control, allowing users to cut around trees, flower beds, and other landscape features without leaving uncut patches. This efficiency significantly reduces mowing time while enhancing the overall quality of the finished lawn.

The ZTR 8025 is constructed with durability in mind. Its heavy-duty steel frame and reinforced cutting deck are designed to withstand the rigors of frequent use. The cutting deck itself features a wide width, typically around 48 to 52 inches, providing a clean and efficient cut. The deck height can be easily adjusted to achieve the desired grass length, accommodating different types of grass and conditions.

Another notable characteristic is the comfort and ergonomic design. The mower is equipped with a comfortable high-back seat that provides ample support for extended mowing sessions. The layout of the controls is intuitive, allowing for easy operation, even for new users. With a well-placed cup holder and ample foot space, the ZTR 8025 makes mowing a more enjoyable experience.

The mower also features advanced technologies such as a built-in hour meter, which helps track maintenance intervals, ensuring that the mower operates at peak efficiency. Furthermore, the ZTR 8025 can be fitted with various attachments and accessories, enhancing its versatility for different tasks beyond mowing, such as mulching or bagging leaves.

In summary, the Dixon ZTR 8025 stands out in the crowded lawn mower market with its powerful engine, zero-turn capabilities, durable construction, and user-friendly design. Whether for professional landscaping or home use, it delivers unmatched performance and efficiency, making it an investment that pays off in both time and quality results.