Dixon ZTR 7525, 13636-0702 manual Blade Drive, Mower Deck CUT Height Lift Lever

Page 18

CONTROLS

BLADE DRIVE:

Located on control panel, on operator's right. To engage blades: Pull up on the switch. To disengage blades: Push down.

MOWER DECK CUT HEIGHT LIFT LEVER:

Located to the right and front of the operator.

Controls the cutting height.

Ten positions of adjustment.

Depress trigger and move lever forward to lower deck.

Depress trigger and pull lever back to raise deck.

Note: Always use high position for transport.

18

Image 18
Contents Series Important Read Carefully Index Safety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Do notChildren Service Service Dixon Limited Warranty Policy Hydro Gear Models Specifications SeatSeat Adjustment Instructions ModelControls Control Levers To GO ForwardParking Brake Choke Control LeverThrottle Control Lever HYDRO-GEAR Drive SystemBlade Drive Mower Deck CUT Height Lift LeverOperation Instructions Before Operating MowerTesting of Safety Interlock Systems Blade Drive Switch Test Electric Clutch Starting Instructions cold engine Engine cannot be restarted when blades are engaged Maintain Sharp Blades Throughout The Cutting Season Do not attempt to cut grass when it is wet Grass Height and Cutting SuggestionsTo Free Wheel Machine Unlock Transmission Care and Maintenance Maintenance ScheduleBattery EngineTires Mower Blades BeltsLubrication Hydrostatic TransmissionsHydrostat OIL Maintenance Procedure Procedure for Raising and Lowering the Deck for Servicing Leveling the Deck Positionoperation Inshown Mower Shown in Servicing Position Troubleshooting Engine WON’T Turn OverEngine Idles Poorly Engine Backfires Standard Service Parts List Model ZTROwner Information ZTRMowers