Dixon 13636-0702, ZTR 7525 manual Leveling the Deck

Page 33

CARE AND MAINTENANCE

LEVELING THE DECK:

A.Set the tire pressure on all four tires.

B.Move the tractor to a hard, level surface (i.e. concrete or blacktop). Place a 2x4 board under all four corners of the deck shell, just inside the anti-scalping wheels. Lower the deck down onto the boards. The deck must rest on the boards, not on the anti-scalping wheels. Adjust the deck hangers longer or shorter until the deck “just” comes off of the boards in front. Raise the rear 1/4” above the boards. Remove the boards and verify that the deck is hanging on all four deck hangers, re-adjust if necessary. Lock the jam nuts on the deck hangers. (Note: the two rear deck hangers will be easier to adjust if the fender skirts are removed.)

Image 33
Contents Series Important Read Carefully Index Blade Contact TIP Over RUN Over Back Over SafetySafety Alert Symbol General Operation General Operation Do not Slope OperationChildren Service Service Dixon Limited Warranty Policy Hydro Gear Models Seat SpecificationsModel Seat Adjustment InstructionsControls To GO Forward Control LeversThrottle Control Lever Choke Control LeverParking Brake HYDRO-GEAR Drive SystemMower Deck CUT Height Lift Lever Blade DriveBefore Operating Mower Operation InstructionsTesting of Safety Interlock Systems Blade Drive Switch Test Electric Clutch Starting Instructions cold engine Engine cannot be restarted when blades are engaged Maintain Sharp Blades Throughout The Cutting Season Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetTo Free Wheel Machine Unlock Transmission Maintenance Schedule Care and MaintenanceBattery EngineTires Belts Mower BladesHydrostatic Transmissions LubricationHydrostat OIL Maintenance Procedure Procedure for Raising and Lowering the Deck for Servicing Leveling the Deck Positionoperation Inshown Mower Shown in Servicing Position Engine WON’T Turn Over TroubleshootingEngine Idles Poorly Engine Backfires Model ZTR Standard Service Parts ListOwner Information ZTRMowers