Dixon ZTR 7525, 13636-0702 manual Testing of Safety Interlock Systems

Page 20

OPERATION INSTRUCTIONS

TESTING OF SAFETY INTERLOCK SYSTEMS:

Do not operate mower if safety switches are not operating properly.

Your Zero Turning Radius Mower is equipped with control interlocks for your safety.

1.The mower blades must be disengaged before the engine will start.

2.The brake lever must be engaged (upward position) before engine will start.

3.The engine will stop if the mower blade clutch is engaged when the operator leaves the driver's seat.

4.This unit is equipped with a mechanical control lever lockout. The brake lever must be disengaged before control levers will move forward.

20

Image 20
Contents Series Important Read Carefully Index Safety Blade Contact TIP Over RUN Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Do notChildren Service Service Dixon Limited Warranty Policy Hydro Gear Models Specifications SeatSeat Adjustment Instructions ModelControls Control Levers To GO ForwardChoke Control Lever Throttle Control LeverParking Brake HYDRO-GEAR Drive SystemBlade Drive Mower Deck CUT Height Lift LeverOperation Instructions Before Operating MowerTesting of Safety Interlock Systems Blade Drive Switch Test Electric Clutch Starting Instructions cold engine Engine cannot be restarted when blades are engaged Maintain Sharp Blades Throughout The Cutting Season Do not attempt to cut grass when it is wet Grass Height and Cutting SuggestionsTo Free Wheel Machine Unlock Transmission Care and Maintenance Maintenance ScheduleTires BatteryEngine Mower Blades BeltsLubrication Hydrostatic TransmissionsHydrostat OIL Maintenance Procedure Procedure for Raising and Lowering the Deck for Servicing Leveling the Deck Positionoperation Inshown Mower Shown in Servicing Position Troubleshooting Engine WON’T Turn OverEngine Idles Poorly Engine Backfires Standard Service Parts List Model ZTROwner Information ZTRMowers