Specifications, SpeedZTR 36, 38, 42

	SPECIFICATIONS
	SpeedZTR™ 36, 38, 42 & 44
Chassis:	1-1/2 X 2 rectangle tube side frame
Mower Deck:	38”/42”- 13 ga stamped 2 blade deck.
	36”/44”- 11 ga fabricated construction w/ reinforced ribs.
Blade Drive:	Electric clutch.
Transmission:	Each rear wheel is independently driven by a Hydro
	Gear EZT hydrostatic drive with cooling fan.
Engine:
38”:	15 HP Briggs & Stratton Intek, 4 cycle, single cylinder,
	overhead valve, air cooled, gasoline, vertical shaft, cast
	iron cylinder, full pressure lube with spin-on filter.
36” & 42”:	16 HP Briggs & Stratton Intek, 4 cycle, single cylinder,
	overhead valve, air cooled, gasoline, vertical shaft, cast
	iron cylinder, full pressure lube with spin-on filter.
44”:	20 HP Kohler single cylinder, 16 HP Honda or 20 HP
	Briggs & Stratton twin cylinder engine, overhead valve,
	air cooled, gasoline, full pressure lube with oil filter,
	vertical shaft, aluminum head and block with cast-iron
	cylinder liners.
Starting	Electric-key switch operation with safety interlock blade
System:	drive.
Tires:	Front 11 x 4.00-5 smooth tread (16-21 PSI)
	36”/38” - Rear 18x7.50-8--4 ply turf tread (8-14 PSI)
	42” - Rear 18x8.50-8--4 ply turf tread (8-14 PSI)
	44” - Rear 18x9.50-8--4 ply turf tread (8-14 PSI)
Capacities:	Fuel	4.5 gallons
	Engine Oil	1.3 quarts
Dimensions:	Width	43” maximum track width
	Height	43” to top edge of seat
	Length	69” hitch tab to front bumper
	Weight	power unit - 482 lbs
		with 36” deck - 574 lbs

with 38” deck - 530 lbs with 42” deck - 537 lbs with 44” deck - 570 lbs

Additional information may be provided elsewhere in this manual.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SPECIFICATIONS