CONTROLS
PARKING BRAKE:
The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the parking brake is engaged while the control levers are in the drive position.
CAUTION | Engage parking brake |
| before starting engine. |
TO SET PARKING BRAKE:
The hand operated parking brake is located on the left hand side between the operators seat and the fuel tank.
•To engage brake, pull lever up (to the rear).
•To release brake, move lever forward (down).
Note: Always set parking brake before dismounting.
Release parking brake before moving mower.
TRANSMISSION DRIVE SYSTEM
Allows the mower to turn on its own axis “ZERO TURNING RADIUS”. Each lever controls one side of the mower.
Note: The pressure required to operate the mower is very light.
20