Dixon HL 36, HL 42, HL 30, 16246-0803 manual R V I C E

Page 10

SAFETY

S E R V I C E :

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

Use only an approved container.

Never remove fuel cap or add fuel with engine running. Allow engine to cool before refueling.

Do not smoke while refueling.

Never store the mower or fuel container inside a building where there is an open flame.

If fuel is spilled on clothing, change clothing immediately.

To prevent fire and explosion caused by static electricity:

Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground away from your vehicle before filling.

When practical, remove fuel powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, refuel such equipment on a trailer with a portable container, rather than from a fuel dispenser nozzle.

If a fuel dispenser nozzle must be used, keep the nozzle in contact with the rim of the fuel tank or container opening at all times until fueling is complete. Do not use a nozzle lock- open device.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Zeeter HL Important Read Carefully Index Safety Blade Contact Tip Over Run Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notR V I C E Service Children Dixon Limited Warranty Policy Residential Hydro Specifications Zeeter HLGA laser cut fabricated. Two blades, 36 cut width Cut width. Cut height approximately 1-1/2- 4 via Controls Control LeversParking Brake To SET Parking BrakeTransmission Drive System Blade DriveOperation Instructions TowingBefore Operating Mower To Free Wheel Machine Unlock Transmission Starting Instructions Testing of Safety Interlock Systems Engine should not turn over or Attempt to startBlade Drive Switch Test Engine should StopSide Discharge of the Clippings Do not attempt to cut grass when it is wet Grass Height and Cutting SuggestionsMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Care and Maintenance Maintenance ScheduleEngine BatteryTires Cutter Blade Maintenance Belts Belt TensionBelts Zeeter HL Mower Deck Serpentine BeltDeck Removal Zeeter HL Care and Maintenance Belt is correctly routed in the grooves of all Service Intervals LubricationChanging the Engine OIL OIL Fill Neutral Adjustment PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsZeeter HL Model Standard Service Parts ListBriggs & Stratton AIR and OIL Filter Part Numbers Troubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Owner Information ZTRMowers

HL 36, HL, HL 30, HL 42, 16246-0803 specifications

Dixon 16246-0803, along with its associated models HL 42, HL 30, and HL 36, represents a comprehensive lineup of advanced products designed for various industrial applications. Known for their robust performance and reliability, these models cater to professionals seeking high-quality solutions in fluid handling and management.

The Dixon 16246-0803 is particularly notable for its innovative design and engineering. It features a lightweight yet durable construction that enhances portability without compromising strength. This model is designed to handle a wide range of fluids, making it versatile for applications in agriculture, manufacturing, and construction.

One of the standout technologies of the Dixon 16246-0803 is its advanced valve system. This system permits precise control of fluid flow, minimizing wastage and ensuring efficiency. The ergonomic design of the valve makes it easy to operate even in challenging conditions, which is a significant advantage in fast-paced industrial environments.

The HL series, which includes models HL 42, HL 30, and HL 36, builds on the foundation laid by the Dixon 16246-0803 and presents additional features tailored for specific needs. The HL 42 model offers greater capacity, making it suitable for larger applications that require higher flow rates. It is also equipped with a reinforced hose connection, ensuring secure and leak-free operation.

In contrast, the HL 30 is designed for medium applications, balancing performance and maneuverability. This model is particularly valued in sectors that require efficient transfers of liquids without the need for heavy machinery, as it combines performance with ease of handling.

The HL 36 model stands out for its compact size, ideal for installations with limited space. Despite its smaller frame, it does not compromise on power, making it an excellent choice for tight work areas. Each HL model incorporates state-of-the-art sealing technology to prevent leakage, ensuring a safe operational environment.

Collectively, the features, technologies, and characteristics of the Dixon 16246-0803 and the HL series present a formidable solution for professionals in the fluid handling domain. With their commitment to quality and performance, these models enhance efficiency while promoting safety and reliability in various industrial settings.
Top Page Image Contents