Dixon HL 30 manual Electrical Systems, Cleaning the Mower, Serial Numbers, Warranty, Parts/Service

Page 43

CARE AND MAINTENANCE

ELECTRICAL SYSTEMS:

Keep all connections clean and tight.

CLEANING THE MOWER:

Wash mower periodically. Clean above and below deck. High pressure washing and alkaline based soaps can cause damage to bearings and other parts of the mower. After washing your mower, start the engine and engage the mower deck for a few minutes to

disperse any water that may have accumulated in bear- ings, pulleys or fans.

Note:	Allow mower to cool before washing. If bearings
	are hot, they will draw moisture inside as they
	cool and cause corrosion.

SERIAL NUMBERS:

The serial number is located on frame at rear of engine.

WARRANTY:

Refer to warranty information on Page 13, or see the Warranty Registration Form in your owner’s packet.

PARTS/SERVICE:

See your Dixon dealer for replacement parts, warranty or service.

PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL CHEMCIALS WHICH MAY DAMAGE OR CAUSE HARM TO

PLANTS AND ANIMALS IN YOUR AREA.

Image 43

Contents Zeeter HL Important Read Carefully Index Blade Contact Tip Over Run Over Back Over SafetySafety Alert Symbol General Operation General Operation Slope Operation Do not Slope OperationR V I C E Service Children Dixon Limited Warranty Policy Residential Hydro Zeeter HL SpecificationsGA laser cut fabricated. Two blades, 36 cut width Cut width. Cut height approximately 1-1/2- 4 via Control Levers ControlsTo SET Parking Brake Parking BrakeBlade Drive Transmission Drive SystemTowing Operation InstructionsBefore Operating Mower To Free Wheel Machine Unlock Transmission Starting Instructions Engine should not turn over or Attempt to start Testing of Safety Interlock SystemsEngine should Stop Blade Drive Switch TestSide Discharge of the Clippings Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintenance Schedule Care and MaintenanceEngine BatteryTires Cutter Blade Maintenance Belt Tension BeltsZeeter HL Mower Deck Serpentine Belt BeltsDeck Removal Zeeter HL Care and Maintenance Belt is correctly routed in the grooves of all Lubrication Service IntervalsChanging the Engine OIL OIL Fill Neutral Adjustment Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEZeeter HL Model Standard Service Parts ListBriggs & Stratton AIR and OIL Filter Part Numbers Engine WON’T Turn Over TroubleshootingEngine Runs but Mower WON’T Move Forward Owner Information ZTRMowers

HL 36, HL, HL 30, HL 42, 16246-0803 specifications

Dixon 16246-0803, along with its associated models HL 42, HL 30, and HL 36, represents a comprehensive lineup of advanced products designed for various industrial applications. Known for their robust performance and reliability, these models cater to professionals seeking high-quality solutions in fluid handling and management.

The Dixon 16246-0803 is particularly notable for its innovative design and engineering. It features a lightweight yet durable construction that enhances portability without compromising strength. This model is designed to handle a wide range of fluids, making it versatile for applications in agriculture, manufacturing, and construction.

One of the standout technologies of the Dixon 16246-0803 is its advanced valve system. This system permits precise control of fluid flow, minimizing wastage and ensuring efficiency. The ergonomic design of the valve makes it easy to operate even in challenging conditions, which is a significant advantage in fast-paced industrial environments.

The HL series, which includes models HL 42, HL 30, and HL 36, builds on the foundation laid by the Dixon 16246-0803 and presents additional features tailored for specific needs. The HL 42 model offers greater capacity, making it suitable for larger applications that require higher flow rates. It is also equipped with a reinforced hose connection, ensuring secure and leak-free operation.

In contrast, the HL 30 is designed for medium applications, balancing performance and maneuverability. This model is particularly valued in sectors that require efficient transfers of liquids without the need for heavy machinery, as it combines performance with ease of handling.

The HL 36 model stands out for its compact size, ideal for installations with limited space. Despite its smaller frame, it does not compromise on power, making it an excellent choice for tight work areas. Each HL model incorporates state-of-the-art sealing technology to prevent leakage, ensuring a safe operational environment.

Collectively, the features, technologies, and characteristics of the Dixon 16246-0803 and the HL series present a formidable solution for professionals in the fluid handling domain. With their commitment to quality and performance, these models enhance efficiency while promoting safety and reliability in various industrial settings.