Dixon HL 30, HL 36, HL 42, 16246-0803 manual To SET Parking Brake

Page 18

CONTROLS

The Dixon ZEETER HL has a hydrostatic drive that requires only two drive levers to control braking, turning, speed and direction.

On initial operation, set throttle speed on slow. Operate with mower blade in “OFF” position.

To avoid “over-controlling” the mower, use a light touch on the drive levers.

Slight movements using fingertip control is all that is necessary.

PARKING BRAKE:

The parking brake is designed to hold the mower from moving and is not intended for use in stop- ping the mower while it is in motion.

CAUTION

Engage parking brake before

starting engine.

 

TO SET PARKING BRAKE:

The hand operated parking brake is located on the right side of the mower.

To engage brake, pull lever up (to the rear).

To release brake, move lever forward (down).

NOTE:

Always set parking brake before

 

dismounting. Release parking

 

brake before moving mower.

18

Image 18
Contents Zeeter HL Important Read Carefully Index Safety Blade Contact Tip Over Run Over Back OverSafety Alert Symbol General Operation General Operation Slope Operation Slope Operation Do notR V I C E Service Children Dixon Limited Warranty Policy Residential Hydro Specifications Zeeter HLGA laser cut fabricated. Two blades, 36 cut width Cut width. Cut height approximately 1-1/2- 4 via Controls Control LeversParking Brake To SET Parking BrakeTransmission Drive System Blade DriveOperation Instructions TowingBefore Operating Mower To Free Wheel Machine Unlock Transmission Starting Instructions Testing of Safety Interlock Systems Engine should not turn over or Attempt to startBlade Drive Switch Test Engine should StopSide Discharge of the Clippings Do not attempt to cut grass when it is wet Grass Height and Cutting SuggestionsMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Care and Maintenance Maintenance ScheduleBattery EngineTires Cutter Blade Maintenance Belts Belt TensionBelts Zeeter HL Mower Deck Serpentine BeltDeck Removal Zeeter HL Care and Maintenance Belt is correctly routed in the grooves of all Service Intervals LubricationChanging the Engine OIL OIL Fill Neutral Adjustment PARTS/SERVICE Cleaning the MowerWarranty Electrical SystemsStandard Service Parts List Zeeter HL ModelBriggs & Stratton AIR and OIL Filter Part Numbers Troubleshooting Engine WON’T Turn OverEngine Runs but Mower WON’T Move Forward Owner Information ZTRMowers

HL 36, HL, HL 30, HL 42, 16246-0803 specifications

Dixon 16246-0803, along with its associated models HL 42, HL 30, and HL 36, represents a comprehensive lineup of advanced products designed for various industrial applications. Known for their robust performance and reliability, these models cater to professionals seeking high-quality solutions in fluid handling and management.

The Dixon 16246-0803 is particularly notable for its innovative design and engineering. It features a lightweight yet durable construction that enhances portability without compromising strength. This model is designed to handle a wide range of fluids, making it versatile for applications in agriculture, manufacturing, and construction.

One of the standout technologies of the Dixon 16246-0803 is its advanced valve system. This system permits precise control of fluid flow, minimizing wastage and ensuring efficiency. The ergonomic design of the valve makes it easy to operate even in challenging conditions, which is a significant advantage in fast-paced industrial environments.

The HL series, which includes models HL 42, HL 30, and HL 36, builds on the foundation laid by the Dixon 16246-0803 and presents additional features tailored for specific needs. The HL 42 model offers greater capacity, making it suitable for larger applications that require higher flow rates. It is also equipped with a reinforced hose connection, ensuring secure and leak-free operation.

In contrast, the HL 30 is designed for medium applications, balancing performance and maneuverability. This model is particularly valued in sectors that require efficient transfers of liquids without the need for heavy machinery, as it combines performance with ease of handling.

The HL 36 model stands out for its compact size, ideal for installations with limited space. Despite its smaller frame, it does not compromise on power, making it an excellent choice for tight work areas. Each HL model incorporates state-of-the-art sealing technology to prevent leakage, ensuring a safe operational environment.

Collectively, the features, technologies, and characteristics of the Dixon 16246-0803 and the HL series present a formidable solution for professionals in the fluid handling domain. With their commitment to quality and performance, these models enhance efficiency while promoting safety and reliability in various industrial settings.