Dixon HL 36, HL 42, HL 30, 16246-0803 manual GA laser cut fabricated. Two blades, 36 cut width

Page 15

 

SPECIFICATIONS

 

ZEETER HL 36”

CHASSIS:

11 gauge welded channel frame

BODY:

All body parts made of rotational molded polyethylene.

 

Front body contains access panel for battery service.

MOWER DECK:

11 GA laser cut fabricated. Two blades, 36” cut width.

 

Cut height approximately 1-1/2”- 4” via 7-position lift

 

handle.

 

BLADE DRIVE:

Electric clutch

TRANSMISSION:

Each rear wheel is independently driven by a Hydro Gear

 

EZT self contained hydrostatic drive.

ENGINE:

13 HP Briggs & Stratton I/C, 4-cycle, single cylinder, air-

 

cooled, gasoline, vertical shaft, aluminum head and block,

 

cast iron sleeve, AVS balanced

STARTING SYSTEM:

Electric by key switch operation with safety interlocks on

 

parking brake and blade drive.

TIRES:

Front

9 x 3.50-4 Turf Tread

 

Rear

16 x 6.50-8 Turf Tread

RECOMMENDED

Front

16-21 PSI

TIRE PRESSURE:

Rear

8-14 PSI

CAPACITIES:

Fuel

1.8 gallon

 

Engine

1.25 quarts oil

DIMENSIONS:

Width

34” outside rear wheel measurement

 

Width

50.5” overall width of deck with deflector

 

Height

32” to top edge of seat

 

Length

67” hitch tab to front

 

Weight

445 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

15

Image 15
Contents Zeeter HL Important Read Carefully Index Blade Contact Tip Over Run Over Back Over SafetySafety Alert Symbol General Operation General Operation Slope Operation Do not Slope OperationR V I C E Service Children Dixon Limited Warranty Policy Residential Hydro Zeeter HL SpecificationsGA laser cut fabricated. Two blades, 36 cut width Cut width. Cut height approximately 1-1/2- 4 via Control Levers ControlsTo SET Parking Brake Parking BrakeBlade Drive Transmission Drive SystemTowing Operation InstructionsBefore Operating Mower To Free Wheel Machine Unlock Transmission Starting Instructions Engine should not turn over or Attempt to start Testing of Safety Interlock SystemsEngine should Stop Blade Drive Switch TestSide Discharge of the Clippings Grass Height and Cutting Suggestions Do not attempt to cut grass when it is wetMowing with a Mulching Attachment Mowing with a Mulching Attachment Mowing with a Grass Catcher Attachment Maintenance Schedule Care and MaintenanceBattery EngineTires Cutter Blade Maintenance Belt Tension BeltsZeeter HL Mower Deck Serpentine Belt BeltsDeck Removal Zeeter HL Care and Maintenance Belt is correctly routed in the grooves of all Lubrication Service IntervalsChanging the Engine OIL OIL Fill Neutral Adjustment Electrical Systems Cleaning the MowerWarranty PARTS/SERVICEStandard Service Parts List Zeeter HL ModelBriggs & Stratton AIR and OIL Filter Part Numbers Engine WON’T Turn Over TroubleshootingEngine Runs but Mower WON’T Move Forward Owner Information ZTRMowers

HL 36, HL, HL 30, HL 42, 16246-0803 specifications

Dixon 16246-0803, along with its associated models HL 42, HL 30, and HL 36, represents a comprehensive lineup of advanced products designed for various industrial applications. Known for their robust performance and reliability, these models cater to professionals seeking high-quality solutions in fluid handling and management.

The Dixon 16246-0803 is particularly notable for its innovative design and engineering. It features a lightweight yet durable construction that enhances portability without compromising strength. This model is designed to handle a wide range of fluids, making it versatile for applications in agriculture, manufacturing, and construction.

One of the standout technologies of the Dixon 16246-0803 is its advanced valve system. This system permits precise control of fluid flow, minimizing wastage and ensuring efficiency. The ergonomic design of the valve makes it easy to operate even in challenging conditions, which is a significant advantage in fast-paced industrial environments.

The HL series, which includes models HL 42, HL 30, and HL 36, builds on the foundation laid by the Dixon 16246-0803 and presents additional features tailored for specific needs. The HL 42 model offers greater capacity, making it suitable for larger applications that require higher flow rates. It is also equipped with a reinforced hose connection, ensuring secure and leak-free operation.

In contrast, the HL 30 is designed for medium applications, balancing performance and maneuverability. This model is particularly valued in sectors that require efficient transfers of liquids without the need for heavy machinery, as it combines performance with ease of handling.

The HL 36 model stands out for its compact size, ideal for installations with limited space. Despite its smaller frame, it does not compromise on power, making it an excellent choice for tight work areas. Each HL model incorporates state-of-the-art sealing technology to prevent leakage, ensuring a safe operational environment.

Collectively, the features, technologies, and characteristics of the Dixon 16246-0803 and the HL series present a formidable solution for professionals in the fluid handling domain. With their commitment to quality and performance, these models enhance efficiency while promoting safety and reliability in various industrial settings.