Dixon 968999515 manual Front Weights, Foot Rest Previouly Removed Hardware

Page 10

ASSEMBLY

8 FRONT WEIGHTS

(See Figure 8)

CAUTION

DO NOT operate mower with grass catcher, unless the front weights are installed.

1.Remove foot rest from the front of the mower.

2.Remove the two (2) front bolts that secure the caster casting to the sides of the frame.

3.Remove the two (2) bolts that secure the caster castin to the bottom of the frame.

4.Place weight bracket on the front of the frame.

5.Secure the weight bracket to the frame with the four (4) previously removed bolts.

6.Install weight to the weight bracket with two

(2)bolts (539990588) and two (2) nuts (539976979).

7.Install foot rest on the weight bracket with six

(6)(539113183 and two (2) (539113182) screws.

NOTE: the shorter screws go in the center.

FOOT REST

PREVIOULY REMOVED HARDWARE

539113177 (CAST WEIGHT)

539113183

(SCREW #10-12 X 1 1/4)

539113182 (SCREW #10-12 X 1)

539976979

(NUT, 3/8-16, NYLOC)

539113225 (WEIGHT BRACKET)

539990588

(BOLT, 3/8-16 X 2, GR5) FIGURE 8

10

Image 10
Contents Operator Parts Manual Manual no 113943 REV. IR 01/23/07Safety Rules Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not Never allow children to operate the machineSafety Rules Table of Contents Unpacking Instructions Tools Required for AssemblyCarton Contents Parts IdentificationMounting Cover Assembly to Support Assembly AssemblyBagger Support Assembly See Figures 1A and 1B Container Assembly See Figure Container Mounting See Figure5LOWER Chute Level Mower DeckFront Weights Foot Rest Previouly Removed HardwareOperation Tips for Improved Bagging OperationBlade Care Customer ResponsibilitiesGeneral Recommendations StorageParts Illustration Parts QTY Description Parts Screw, #10-12 x 1 1/4, wash hd Standard Hardware Torque SpecificationsMetric Standard Hardware Page HTC