Dixon 968999515 manual Customer Responsibilities, General Recommendations, Blade Care, Storage

Page 12

CUSTOMER RESPONSIBILITIES

GENERAL RECOMMENDATIONS:

Always observe safety rules when performing any maintenance.

Before each use check for loose fasteners.

Clean unit thoroughly after each use.

BLADE CARE:

For best results mower blades must be kept sharp. Replace bent or damaged blades.

See BLADE CARE instructions in your mow- er operator’s manual.

CAUTION

BEFORE PERFORMING ANY MAINTE- NANCE, SERVICE OR ADJUSTMENTS:

Set parking brake.

Place motion control levers in "NEU- TRAL" position.

Place clutch control in "DISENGAGED" position.

Turn ignition key to "OFF" position.

Make sure blades and all moving parts have completely stopped.

Disconnect spark plug wire(s) from spark plug(s) and place wire where it cannot come in contact with plug.

STORAGE:

When grass catcher is to be stored for a period of time, clean it thoroughly, remove all dirt, grass, leaves, etc. Store in a clean, dry place.

CAUTION

Do not leave grass in bagger containers. Empty containers after each use and be- fore storing. Failure to do so may result in spontaneous combustion which could de- velop into a fire.

CAUTION

Grass catcher components are subject to wear, damage and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check compo- nents and replace with manufacturer’s rec- ommended parts, when necessary.

12

Image 12
Contents Operator Parts Manual Manual no 113943 REV. IR 01/23/07Safety Rules Safe Operation Practices for RIDE-ON MowersSafe Operation Practices for RIDE-ON Mowers Do not Never allow children to operate the machineSafety Rules Table of Contents Tools Required for Assembly Carton ContentsUnpacking Instructions Parts IdentificationAssembly Mounting Cover Assembly to Support AssemblyBagger Support Assembly See Figures 1A and 1B Container Assembly See Figure Container Mounting See Figure5LOWER Chute Level Mower DeckFront Weights Foot Rest Previouly Removed HardwareOperation Tips for Improved Bagging OperationCustomer Responsibilities General RecommendationsBlade Care StorageParts Illustration Parts QTY Description Parts Screw, #10-12 x 1 1/4, wash hd Torque Specifications Standard HardwareMetric Standard Hardware Page HTC